My KB Cobra engine bay pics...
#1
Administrator
Thread Starter
My KB Cobra engine bay pics...
I'm not big on appearance mods and this car certainly is no garage queen
so it's not very clean. I took some engine bay pics today to thank a friend
for some free parts. I thought some of you might like to see them.
Next on the mod list are Corbeau seats and an ice box. I'm contemplating
headers, but that means I'd be committing to the blower instead of going
turbo.
There's a dyno vid in my sig for those who may be interested.
Belt slip is minimal due to maximum surface area / belt wrap.
so it's not very clean. I took some engine bay pics today to thank a friend
for some free parts. I thought some of you might like to see them.
Next on the mod list are Corbeau seats and an ice box. I'm contemplating
headers, but that means I'd be committing to the blower instead of going
turbo.
There's a dyno vid in my sig for those who may be interested.
Belt slip is minimal due to maximum surface area / belt wrap.
#2
Administrator
Thread Starter
Mod List for those who are interested(off the top of my head):
2.2L KB @ 19psi
Tune - A/F is 11.4 & 18.75* of timing
DTS Solid axle (Moser 31 splines, 3.90 gear, Wolfe upper/lowers,
Lakewood 50/50's, etc)
Bassani xpipe w/ cats
Bassani catback w/ 4" tips
SD 55lb injectors & jumpers
KB BAP
Accufab TB
UPR clutch quadrant / firewall adjuster
Billetflow 2.76 upper pulley w/ idlers
JLT RAI kit
NX wet kit
Detroit Speedworks electronic WOT switch
Mickey Thompson ET drag radials
Pro 5.0 shifter w/ MGW shift handle & ****
Shorty antenna (50rwhp )
LFP heat exhanger
Eibach lowering springs
Steeda caster/camber plates
Kenny Brown seat rail extenders
Livernois Motorsports custom built oil catch can for the KB
UPR billet fusebox cover
Ram Clutch
Tinted windows
Redline hood shocks
I'm sure there's more...
2.2L KB @ 19psi
Tune - A/F is 11.4 & 18.75* of timing
DTS Solid axle (Moser 31 splines, 3.90 gear, Wolfe upper/lowers,
Lakewood 50/50's, etc)
Bassani xpipe w/ cats
Bassani catback w/ 4" tips
SD 55lb injectors & jumpers
KB BAP
Accufab TB
UPR clutch quadrant / firewall adjuster
Billetflow 2.76 upper pulley w/ idlers
JLT RAI kit
NX wet kit
Detroit Speedworks electronic WOT switch
Mickey Thompson ET drag radials
Pro 5.0 shifter w/ MGW shift handle & ****
Shorty antenna (50rwhp )
LFP heat exhanger
Eibach lowering springs
Steeda caster/camber plates
Kenny Brown seat rail extenders
Livernois Motorsports custom built oil catch can for the KB
UPR billet fusebox cover
Ram Clutch
Tinted windows
Redline hood shocks
I'm sure there's more...
Last edited by unit213; 07-01-2006 at 08:24 PM.
#4
Administrator
Thread Starter
Originally Posted by the predator
damn, that KB sounds mean as hell!
Originally Posted by the predator
badass cobra buddy, im interested in seeing some nitrous runs! how much are you spraying?
I'm going to do some more fuel system mods prior to spraying though just
to be safe.
Trending Topics
#10
Administrator
Thread Starter
Now this is funny...100% bone stock back in 2003. They're so cute
at that age.
I've sprayed the **** out of it while I had the ported Eaton on there.
It was Saturday night when we tuned the car and we cut it short so
we could go out. My buddy dialed it in on the blower and we called it a day.
There's still some fuel left in it, but the stock pumps are getting to the maxed
out point. So, I'll just upgrade the fuel system then spray the bejesus out
of it. I'm hoping for 138-140mph traps on a 100shot.
Just more dyno vids that are all pretty similiar to the one in my sig.
I have a few track vids too, but they suck ***...bad filming at night, etc.
I was working out a lot of kinks so most track vids are nothing to sneeze
at. The track is definitely different that the street. Tire height, gearing, rev
limiter, perfect amount of clutch slip, etc are all key factors where as
the street is something totally different.
I get kicked out of the track after one pass these days since I have
zero safety equipment. This thing is 100% street car.
I'll get some good footage this summer. I'll make a point to take
some at the track and of a few highway runs or something.
at that age.
Originally Posted by Lithium
hahaha damn! KB and a wet kit...very nice!
you ever dyno while spraying yet? cant remember if you have or not.
you ever dyno while spraying yet? cant remember if you have or not.
It was Saturday night when we tuned the car and we cut it short so
we could go out. My buddy dialed it in on the blower and we called it a day.
There's still some fuel left in it, but the stock pumps are getting to the maxed
out point. So, I'll just upgrade the fuel system then spray the bejesus out
of it. I'm hoping for 138-140mph traps on a 100shot.
Originally Posted by 00silver6
do you have any other videos of her
I have a few track vids too, but they suck ***...bad filming at night, etc.
I was working out a lot of kinks so most track vids are nothing to sneeze
at. The track is definitely different that the street. Tire height, gearing, rev
limiter, perfect amount of clutch slip, etc are all key factors where as
the street is something totally different.
I get kicked out of the track after one pass these days since I have
zero safety equipment. This thing is 100% street car.
I'll get some good footage this summer. I'll make a point to take
some at the track and of a few highway runs or something.
#14
10 Second Club
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by unit213
Now this is funny...100% bone stock back in 2003. They're so cute
at that age.
I've sprayed the **** out of it while I had the ported Eaton on there.
It was Saturday night when we tuned the car and we cut it short so
we could go out. My buddy dialed it in on the blower and we called it a day.
There's still some fuel left in it, but the stock pumps are getting to the maxed
out point. So, I'll just upgrade the fuel system then spray the bejesus out
of it. I'm hoping for 138-140mph traps on a 100shot.
Just more dyno vids that are all pretty similiar to the one in my sig.
I have a few track vids too, but they suck ***...bad filming at night, etc.
I was working out a lot of kinks so most track vids are nothing to sneeze
at. The track is definitely different that the street. Tire height, gearing, rev
limiter, perfect amount of clutch slip, etc are all key factors where as
the street is something totally different.
I get kicked out of the track after one pass these days since I have
zero safety equipment. This thing is 100% street car.
I'll get some good footage this summer. I'll make a point to take
some at the track and of a few highway runs or something.
at that age.
I've sprayed the **** out of it while I had the ported Eaton on there.
It was Saturday night when we tuned the car and we cut it short so
we could go out. My buddy dialed it in on the blower and we called it a day.
There's still some fuel left in it, but the stock pumps are getting to the maxed
out point. So, I'll just upgrade the fuel system then spray the bejesus out
of it. I'm hoping for 138-140mph traps on a 100shot.
Just more dyno vids that are all pretty similiar to the one in my sig.
I have a few track vids too, but they suck ***...bad filming at night, etc.
I was working out a lot of kinks so most track vids are nothing to sneeze
at. The track is definitely different that the street. Tire height, gearing, rev
limiter, perfect amount of clutch slip, etc are all key factors where as
the street is something totally different.
I get kicked out of the track after one pass these days since I have
zero safety equipment. This thing is 100% street car.
I'll get some good footage this summer. I'll make a point to take
some at the track and of a few highway runs or something.
Now, what do you have your rev limiter set to? I ask because 138-140 seems prety high considering the gearing.
I have 3:90's and I'm adding a 150 hp wet plate system very soon. I'm hoping to hit 130+ mph in the traps (i'm hitting 119 N/A), but I have my rev limiter set at 6800 and from what I've looked up, 3:90's at 6800 in 4th gear will top out at 133-134 tops in 4th.
Do you think 150hp shot will even give me that much MPH anyway?
#15
Administrator
Thread Starter
Originally Posted by SSilverSSurfer
definitely bad ***, im gonna fly to michigan and get a ride in that bad boy...lol
Originally Posted by 12stones
How are those Mickey T's holding up?
long on the street. I'm very happy with them. However, I did get caught in a rain
storm on the way back from the track. The rear end kicked out about 5ft to the left
during the ride home while on the highway. That was an eye opener.
Originally Posted by Trust
I love that car.. any more pics of it?
pics up today or tomorrow.
Originally Posted by 00Vette
First off.........I have to say your setup looks bad ***!
Originally Posted by 00Vette
Damn that thing has to snap your head back!
Originally Posted by 00Vette
Now, what do you have your rev limiter set to? I ask because 138-140 seems prety high considering the gearing.
really sprayed the KB a whole lot so I don't have all the details worked out yet.
I didn't do any of the gearing / tire height calculations yet. A 28" tire will definitely
be required though. If needed, I'll drop back down to a 3.55 gear. The car sits very
low so I might have to through some different springs on in order to get a 28" tire
to fit.
Originally Posted by 00Vette
I have 3:90's and I'm adding a 150 hp wet plate system very soon. I'm hoping to hit 130+ mph in the traps (i'm hitting 119 N/A), but I have my rev limiter set at 6800 and from what I've looked up, 3:90's at 6800 in 4th gear will top out at 133-134 tops in 4th.
Originally Posted by 00Vette
Do you think 150hp shot will even give me that much MPH anyway?
one way to find out.
#17
On The Tree
Join Date: Dec 2003
Location: Austin, TX
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by unit213
Mod List for those who are interested(off the top of my head):
2.2L KB @ 19psi
Tune - A/F is 11.4 & 18.75* of timing
DTS Solid axle (Moser 31 splines, 3.90 gear, Wolfe upper/lowers,
Lakewood 50/50's, etc)
Bassani xpipe w/ cats
Bassani catback w/ 4" tips
SD 55lb injectors & jumpers
KB BAP
Accufab TB
UPR clutch quadrant / firewall adjuster
Billetflow 2.76 upper pulley w/ idlers
JLT RAI kit
NX wet kit
Detroit Speedworks electronic WOT switch
Mickey Thompson ET drag radials
Pro 5.0 shifter w/ MGW shift handle & ****
Shorty antenna (50rwhp )
LFP heat exhanger
Eibach lowering springs
Steeda caster/camber plates
Kenny Brown seat rail extenders
Livernois Motorsports custom built oil catch can for the KB
UPR billet fusebox cover
Ram Clutch
Tinted windows
Redline hood shocks
I'm sure there's more...
2.2L KB @ 19psi
Tune - A/F is 11.4 & 18.75* of timing
DTS Solid axle (Moser 31 splines, 3.90 gear, Wolfe upper/lowers,
Lakewood 50/50's, etc)
Bassani xpipe w/ cats
Bassani catback w/ 4" tips
SD 55lb injectors & jumpers
KB BAP
Accufab TB
UPR clutch quadrant / firewall adjuster
Billetflow 2.76 upper pulley w/ idlers
JLT RAI kit
NX wet kit
Detroit Speedworks electronic WOT switch
Mickey Thompson ET drag radials
Pro 5.0 shifter w/ MGW shift handle & ****
Shorty antenna (50rwhp )
LFP heat exhanger
Eibach lowering springs
Steeda caster/camber plates
Kenny Brown seat rail extenders
Livernois Motorsports custom built oil catch can for the KB
UPR billet fusebox cover
Ram Clutch
Tinted windows
Redline hood shocks
I'm sure there's more...
So you are tall as well I take it? I had the KB Seat Rail Extenders on mine as too...still couldn't fit very well...
#19
11 Second Club
iTrader: (6)
Join Date: Jan 2005
Location: Jax, Fl
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
as with all the other people that posted, your car is badass, period.
dont know much about the cobra's but do you think your faster with the kenne bell w/o the spray compared to the eaton with it???
someday i might have a as fast as yours, some day...
dont know much about the cobra's but do you think your faster with the kenne bell w/o the spray compared to the eaton with it???
someday i might have a as fast as yours, some day...
#20
Launching!
iTrader: (4)
Join Date: Jun 2003
Location: valley village, los angeles
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
those are alot of mods and alot of boost, I would still beat you in a race though Are you in Los Angeles?
Originally Posted by unit213
Mod List for those who are interested(off the top of my head):
2.2L KB @ 19psi
Tune - A/F is 11.4 & 18.75* of timing
DTS Solid axle (Moser 31 splines, 3.90 gear, Wolfe upper/lowers,
Lakewood 50/50's, etc)
Bassani xpipe w/ cats
Bassani catback w/ 4" tips
SD 55lb injectors & jumpers
KB BAP
Accufab TB
UPR clutch quadrant / firewall adjuster
Billetflow 2.76 upper pulley w/ idlers
JLT RAI kit
NX wet kit
Detroit Speedworks electronic WOT switch
Mickey Thompson ET drag radials
Pro 5.0 shifter w/ MGW shift handle & ****
Shorty antenna (50rwhp )
LFP heat exhanger
Eibach lowering springs
Steeda caster/camber plates
Kenny Brown seat rail extenders
Livernois Motorsports custom built oil catch can for the KB
UPR billet fusebox cover
Ram Clutch
Tinted windows
Redline hood shocks
I'm sure there's more...
2.2L KB @ 19psi
Tune - A/F is 11.4 & 18.75* of timing
DTS Solid axle (Moser 31 splines, 3.90 gear, Wolfe upper/lowers,
Lakewood 50/50's, etc)
Bassani xpipe w/ cats
Bassani catback w/ 4" tips
SD 55lb injectors & jumpers
KB BAP
Accufab TB
UPR clutch quadrant / firewall adjuster
Billetflow 2.76 upper pulley w/ idlers
JLT RAI kit
NX wet kit
Detroit Speedworks electronic WOT switch
Mickey Thompson ET drag radials
Pro 5.0 shifter w/ MGW shift handle & ****
Shorty antenna (50rwhp )
LFP heat exhanger
Eibach lowering springs
Steeda caster/camber plates
Kenny Brown seat rail extenders
Livernois Motorsports custom built oil catch can for the KB
UPR billet fusebox cover
Ram Clutch
Tinted windows
Redline hood shocks
I'm sure there's more...