If I remember correctly, yes, it only took a couple days. Great customer service too. After I installed the kit my passenger side turn signals stopped flashing. They stayed on the phone with me for a half hour debugging it, turns out my front turn signal bulb was half dead, I didn't know they were dual filament, there was no problem with the kit itself and everything works perfectly, and has been for 7 months since I installed it.

I don't think you'll be disappointed!

 

works for me.....thanks for the info..

 

well i got the webelectricproducts.com light kit and installed both sides.

my passenger side worked fine but the drivers side didnt sequence at all.....the outer bulb would not flash and the inner and middle bulbs didnt even sequence.

so im thinking the module is bad.

Im going to give the guy a call tomorrow and see whats up..

pissed me off cause i had to take all the connections I made back off and put it back to stock.


side note....passenger side looked cool and worked perfect.

 

Ahh, I'm sorry to hear that, hopefully it'll be resolved quickly. good luck.

 

anybody get this to work with LEDs?

 

**x2**

 

i contacted the company.......they say it will work as long as the end bulb is not LED......but i dont want to have 1 regular bulb in my LED conversion

 

I'd think that you could add a resistor to make the LED "look" just like an incandescent.

The other thing I'd be worried about is how the LED's behave with the sequential flash. Would they dim like an incandescent does when its turned off? If the LED"s have a harsh on/off behavior, the sequence may look a little choppy.

 

i believe a kit could be made that supports full LED.........but they dont want to do it......any electronic gurus out there who could step up?

 

I would definitely make one... but I don't want to either. lol It's a PITA and having to support people who are having normal issues with switching to LED's makes it worse. (If someone made the LED kit, they would have a few inquiries about the kit and 10X as much about LED issues.)

 

they do have LED dimmers.....so the capability is there.......and dimming was the reason for not supporting LED

 

same damn problem with me. Except my driver side is fine, but passenger side doesn't work. The inner and middle bulbs blink but dont sequence. The outter bulb doesn't blink at all. Really irritating because it's all apart and stuck at the point. Luckily the t/a isn't my daily driver or I'll be screwed.

Would be nice if web electronics had a 24hr tech support.

 

I'm pretty sure the company is just one guy.

 

I'm pretty sure Lawrence is the only guy that operates the company too

Just when in need of some "tech support" as they say over the phone, it would be nice to have it instantly, instead of emailing or waiting to call the next day. I'm just saying

 

give him a call. He is easy to work with.

My problem was I must have had a bad module . SO he shipped me out a replacement and I shipped the one that didnt work back to him.

I just got around to installing it...cause of work...and it worked fine.

so im good to go!!

 

I wonder if I have a bad module too, since its doing the same thing yours was doing. Its hard to contact him as he is on the east coast and im on the west, and me working 6 days a week getting off at 5.
I emailed him and its been a waiting game to get help troubleshooting it. Im being as patient as I can

 

Just ordered my kit from webelectric tonight. Hope I get a set with no issues. T/S and shipping back and forth could be pain from Hawaii.

On a lighter note, the videos of them I've seen look sick! Can't wait!

 

I wanted to do a full LED conversion in the back and saw this thread now I want the sequential set up but I want to use LEDS is there any update if these will work. Since this thread was originally almost 3 years old LED technology has come a long way. If you check out DDMtuning.com they have LEDs that will "dim" meaning they act like dual filament bulbs if that might have been the problem in 2010 when this kit came out.

 

I've been waiting for a led solution myself
I had a tc kit in my car and now one side has 2 bulbs that won't work
checked with a volt meter and it's not sending power to the buls

 

well i really want leds with this kit.... did you try the webtronics one with leds/?