New hydrographic samples and color info - Lots of pictures ;)
#1
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
New hydrographic samples and color info - Lots of pictures ;)
Here are some patterns we've done this weekend and we did several colors underneath to show what the top layer will look like as a result.
(These pieces still need to be polished)
First off, here are some C6 and Viper parts done in black base coat with CF-621 on top:
CF-01-12 pattern
Orange
Red
Silver
Yellow
(These pieces still need to be polished)
First off, here are some C6 and Viper parts done in black base coat with CF-621 on top:
CF-01-12 pattern
Orange
Red
Silver
Yellow
Last edited by dragonZ28; 02-08-2010 at 06:00 AM.
#3
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
IL-940
Green
IL-72-20 over Red
Il-71 over White
HC-252 oved Tan
MC-74 over Blue
BW-65-30 Burlwood over Lt Brown
SW-270 over Lt Brown
Green
IL-72-20 over Red
Il-71 over White
HC-252 oved Tan
MC-74 over Blue
BW-65-30 Burlwood over Lt Brown
SW-270 over Lt Brown
Last edited by dragonZ28; 02-08-2010 at 06:01 AM.
Trending Topics
#8
TECH Veteran
iTrader: (4)
I'm gonna be sending you guys some camera gear once i get my new set up. should be a nice touch.
i got a quick question. i noticed that the lines of the patterns go in different directions. for pieces that get ordered, do you have a set way of dipping them where the lines always point the same way? i was thinking, what if i get a couple parts dipped for the car, that will be mounted close to each other... it would look a little odd if the patterns were all running in different directions (ie. vertical, horizontal, diagonal, etc)
hopefully you know what i mean...
i got a quick question. i noticed that the lines of the patterns go in different directions. for pieces that get ordered, do you have a set way of dipping them where the lines always point the same way? i was thinking, what if i get a couple parts dipped for the car, that will be mounted close to each other... it would look a little odd if the patterns were all running in different directions (ie. vertical, horizontal, diagonal, etc)
hopefully you know what i mean...
#9
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I'm gonna be sending you guys some camera gear once i get my new set up. should be a nice touch.
i got a quick question. i noticed that the lines of the patterns go in different directions. for pieces that get ordered, do you have a set way of dipping them where the lines always point the same way? i was thinking, what if i get a couple parts dipped for the car, that will be mounted close to each other... it would look a little odd if the patterns were all running in different directions (ie. vertical, horizontal, diagonal, etc)
hopefully you know what i mean...
i got a quick question. i noticed that the lines of the patterns go in different directions. for pieces that get ordered, do you have a set way of dipping them where the lines always point the same way? i was thinking, what if i get a couple parts dipped for the car, that will be mounted close to each other... it would look a little odd if the patterns were all running in different directions (ie. vertical, horizontal, diagonal, etc)
hopefully you know what i mean...
#11
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Most patterns do not matter - the prices are the same. I will be carrying several premium patterns from another supplier that my current one does not offer. The patterns are not better quality wise, they just cost me almost double my current patterns. You may like these better:
I'll have this pattern next week, but it will cost a bit more because it costs me more.
I'll have this pattern next week, but it will cost a bit more because it costs me more.
#17
On The Tree
iTrader: (6)
Join Date: Oct 2007
Location: Fort Lewis, Washington
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Can you give us the info of the supplier where you get the patterns?
I ask because if he has patterns that you are not currently offering maybe someone could buy that type of pattern and send it to you for their own custom piece.
Or if you will have all of their patters it solves the problem. I am highly interested in the metal patterns aswell
I ask because if he has patterns that you are not currently offering maybe someone could buy that type of pattern and send it to you for their own custom piece.
Or if you will have all of their patters it solves the problem. I am highly interested in the metal patterns aswell