1993-2002 F-BODY Gauge AND HVAC, Headlight, etc... Overlays GROUP PURCHASE 12!!!
04-20-2010, 10:49 PM
#63
04-21-2010, 01:13 AM
#64
I think i might be liking that...i just wish i could see it all done without you having to go to all that trouble 
I think i might leave the "X" red, just to be "correct" if you will. i'm going for a totally OEM, clean look with anything and everything i can. The "LS" before the "x" would be grey/silver of course like you said, but do you think you could make 3D looking letter, kind of as if they were stainless/reflective/mirror or something? maybe just some kind of shading or shadow effect i suppose. I also like how the Dick Harrell logo lights up around it, how hard would it be to make the "LSX" do that and still look right during the day?
What about the S86 needles? i need to make everything tie together a bit (thinking about my digital cobalt gauges on the A-pillar)...maybe clear needles with blue LED's behind the gauges? i dunno how it would look, but i like how it sounds.
I think i might leave the "X" red, just to be "correct" if you will. i'm going for a totally OEM, clean look with anything and everything i can. The "LS" before the "x" would be grey/silver of course like you said, but do you think you could make 3D looking letter, kind of as if they were stainless/reflective/mirror or something? maybe just some kind of shading or shadow effect i suppose. I also like how the Dick Harrell logo lights up around it, how hard would it be to make the "LSX" do that and still look right during the day?
What about the S86 needles? i need to make everything tie together a bit (thinking about my digital cobalt gauges on the A-pillar)...maybe clear needles with blue LED's behind the gauges? i dunno how it would look, but i like how it sounds.
If it were me I would go with white needles, I just got mine installed & they are awesome! That way any color LED you go with will work with the needles, plus it will be a nice contrast during the day.
04-21-2010, 02:47 AM
#66
To clarify.... the "white" needle IS the "clear" needle. It's just worded weird on the site. (the white needle is our clear needle with a silk screened white background) The reason we can't/won't do clear is because you'd lose light as it travels to the tip. The white background bounces the light down the backside and allows it to light up. Also, if the needle was completely clear you'd see the overlay through it and then not see the needle at all. (actually you still would, but it would be harder to see) I also don't want any of you to be unhappy or unsatisfied. The white really does an amazing contrast on ANY color and you'll be happy.
Like McN said, the white looks awesome. They look more "race inspired" and are REALLY set off with any color LED. Although one of my faves we did was a blue set for a guy with blue LED's and his looked AWESOME too!
04-30-2010, 05:28 AM
#73
McNord had it ready for me on Sunday but I've just been away from my home computer where they are to upload them so I can post them 
Even right now I'm just on a laptop... Lots of acting stuff this week. Tomorrow without a doubt though. They look great and he also did a 35th Prototype that is going to change the game AGAIN
Even right now I'm just on a laptop... Lots of acting stuff this week. Tomorrow without a doubt though. They look great and he also did a 35th Prototype that is going to change the game AGAIN
05-01-2010, 08:29 PM
#78
I don't mean to be too rude, but
If you go to his website and read in full, you will find the date. It may have even been mentioned in this thread.
http://6litereaterdesigns.com/store/...cb39ee1faa7213
If you go to his website and read in full, you will find the date. It may have even been mentioned in this thread.
http://6litereaterdesigns.com/store/...cb39ee1faa7213
05-02-2010, 04:10 PM
#80
TECH Enthusiast
iTrader: (3)
Join Date: Jun 2009
Location: Houston, Tx
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
put my order in last night!!
EDIT: going to try to scrape a bit more money together for the rest of things (HVAC and shift plate)
EDIT: going to try to scrape a bit more money together for the rest of things (HVAC and shift plate)
Last edited by pheer; 05-02-2010 at 09:21 PM.