Interest Thread - 93-97 Camaro Projector Setup - Input Needed
Wow tough crowd 
I can tell there are many years of frustration based on some of the recent posts. As I mentioned previously, we are still working on the kit and trying a few different ideas.
The new projectors are in hand and will be test fitting them after the holidays. I'm also speaking with a number of manufacturers/fabricators to see if this is something that can be genuinely be built in reasonable order size and consistent quantities.
I understand this has and will continue to be a long time coming but most of you have waited at least 13 years for a dedicated lighting solution. Many have attempted this and obviously failed but for good reason. Our time and funds are being spent with the risk of getting a successful product to market and a reasonable price. I like many of you, simply want the product and talk is cheap. Again, I hope you can all trust we are working on the kit and for obvious business reasons, would prefer it come to market sooner than later.
I can tell there are many years of frustration based on some of the recent posts. As I mentioned previously, we are still working on the kit and trying a few different ideas.The new projectors are in hand and will be test fitting them after the holidays. I'm also speaking with a number of manufacturers/fabricators to see if this is something that can be genuinely be built in reasonable order size and consistent quantities.
I understand this has and will continue to be a long time coming but most of you have waited at least 13 years for a dedicated lighting solution. Many have attempted this and obviously failed but for good reason. Our time and funds are being spent with the risk of getting a successful product to market and a reasonable price. I like many of you, simply want the product and talk is cheap. Again, I hope you can all trust we are working on the kit and for obvious business reasons, would prefer it come to market sooner than later.
A few LS1Tech members have been over the shop to see the projectors we will be using for the setup. We also have some new ideas to make the setup easier to install, perform just as well and with a cheaper bottom line.
Apologies for not updating this thread but everything is still going to take more time. Once the final design is complete, I want to put it on a couple daily drivers to make sure customers do not run into issues in their own vehicles. I understand everyone is anxious for any pics, drawings, etc but that is simply going to have to wait.
Apologies for not updating this thread but everything is still going to take more time. Once the final design is complete, I want to put it on a couple daily drivers to make sure customers do not run into issues in their own vehicles. I understand everyone is anxious for any pics, drawings, etc but that is simply going to have to wait.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo A few LS1Tech members have been over the shop to see the projectors we will be using for the setup. We also have some new ideas to make the setup easier to install, perform just as well and with a cheaper bottom line.
Apologies for not updating this thread but everything is still going to take more time. Once the final design is complete, I want to put it on a couple daily drivers to make sure customers do not run into issues in their own vehicles. I understand everyone is anxious for any pics, drawings, etc but that is simply going to have to wait.
Apologies for not updating this thread but everything is still going to take more time. Once the final design is complete, I want to put it on a couple daily drivers to make sure customers do not run into issues in their own vehicles. I understand everyone is anxious for any pics, drawings, etc but that is simply going to have to wait.
I'm deffinately interested in the final outcome unless I find a solution myself, but I really don't see that happening haha
Overall impressions were "controlled excitement" haha. They liked where it was going and won't stop bugging me for the final product. 
Yea, this is not an easy retro and likely the reason nothing has been developed completely in 17 years.
I understand, I know that there would be a handful of companies that would run out and copy your designs if they had the option. I'm just anxious to see what they are going to look like, if I were closer I would stop out and check them out, but thats not the case.
I'm deffinately interested in the final outcome unless I find a solution myself, but I really don't see that happening haha
I'm deffinately interested in the final outcome unless I find a solution myself, but I really don't see that happening haha
THEY ARE ******* TITSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I bug him at least once a week for him to craft some perfection! Hell I work on his car just to see any potential progress!!
Trust me guys, its going to be well worth the wait. Maybe some spy photos shall arise??
I bug him at least once a week for him to craft some perfection! Hell I work on his car just to see any potential progress!!
Trust me guys, its going to be well worth the wait. Maybe some spy photos shall arise??
THEY ARE ******* TITSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I bug him at least once a week for him to craft some perfection! Hell I work on his car just to see any potential progress!!
Trust me guys, its going to be well worth the wait. Maybe some spy photos shall arise??
I bug him at least once a week for him to craft some perfection! Hell I work on his car just to see any potential progress!!
Trust me guys, its going to be well worth the wait. Maybe some spy photos shall arise??
We all can't strip wheel stud threads 2" deep....takes a special person to do that. 
heh.. this is true...
Well, to continue the nonsense of this thread, I know a nice garage kept blue LT1 car that would love to have more wires and what not added to it....
And yes, the new lights do look very promising, just don't make em bug eye'd like whatshisnames car.
Well, to continue the nonsense of this thread, I know a nice garage kept blue LT1 car that would love to have more wires and what not added to it....
And yes, the new lights do look very promising, just don't make em bug eye'd like whatshisnames car.
