tall valve covers come in
#1
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Aug 2006
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
tall valve covers come in
has anyone isntalled these valve cover if so can you guide me on how you did it? these are a pain in the ***.
https://ls1tech.com/forums/western-m...Q5fAccessories
https://ls1tech.com/forums/western-m...Q5fAccessories
#2
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Aug 2006
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
****, i pulled the oil filler elbow off my gf's car and i have a problem.
the damn stock elbow doesnt fit the new valve covers and the k&n filter doesnt fit the damn elbow.
i had the filter on the covers directly,but the damn last coil doesnt let the filter completely in. I'm going to have to find a custom elbow. any ideas?
(excuse the fingerprints all over the filter..lol)
and this is what it looks like with out the filter.
the damn stock elbow doesnt fit the new valve covers and the k&n filter doesnt fit the damn elbow.
i had the filter on the covers directly,but the damn last coil doesnt let the filter completely in. I'm going to have to find a custom elbow. any ideas?
(excuse the fingerprints all over the filter..lol)
and this is what it looks like with out the filter.
Trending Topics
#11
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Aug 2006
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
i had a bunch of problems with mine. the heater hose is really tight and gets in the way. the last coil is really hard to get too and i had to break off a piece off the plastic that holds the heater hose.i wish the listing on ebay would have stated how much modding they required.
well I might try and relocate and drill the last last coil like haulu said. if i get the filter to fit would i be ok? i also pluged the tb and mani. I've been told that i also need a ls6 valley cover. what will happend if i dont get one and run it with the plugs and a filter?
well I might try and relocate and drill the last last coil like haulu said. if i get the filter to fit would i be ok? i also pluged the tb and mani. I've been told that i also need a ls6 valley cover. what will happend if i dont get one and run it with the plugs and a filter?
#13
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Aug 2006
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
i would have done that if i didnt scratch them up on the psg side. the coil rack was insanly tight and i did get a few lil scratches on them. if i were to chome them can they remove the scratches?
#18
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Aug 2006
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
well these ****** valve covers are leaking oil from the psg side. i cant see why. i bolted down the bolts till they pretty much spun...lol! i dont have a torque wrech,but usually the stock one just need to be a lil more than hand tight and they are fine. I tried driving the car to Matts house today and i saw the car smoking up and leaking oil on to the headders. I might just have to go with a different set of valve covers.