Another engine bay cover (in work)
#42
Banned
iTrader: (2)
Dude...you gotta have the rear edge of that piece marry up to the bottom of the air box edge so the air goes right into the air opening. Otherwise, its not gonna help much. And can you make it so it the front edge of the piece contours the two scoops. It would be great of that could be done, then have it seal with weather-stripping all the way around.....then these cars would actually have a true ram air hood.
.
.
#43
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Jan 2008
Location: Florida
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Dude...you gotta have the rear edge of that piece marry up to the bottom of the air box edge so the air goes right into the air opening. Otherwise, its not gonna help much. And can you make it so it the front edge of the piece contours the two scoops. It would be great of that could be done, then have it seal with weather-stripping all the way around.....then these cars would actually have a true ram air hood.
.
.
#53
Banned
iTrader: (2)
Point taken, I understand what you mean but....the hood will not close (latch) if the back end of the plate is level with the air box. Great idea and it makes perfect sense for the idea that you have but in order for that to work, the hoop latch on the bottom of the hood needs to be abou 1/2" longer for depth purposes.
.
#54
Banned
iTrader: (2)
First...I suck at editing pictures.......lol
You can see where I would put up walls on the side, and around the hood latch. Maybe some kind of material that could flex as the hood comes down on it, sealing it from top and bottom. Then the long strip "bridge" that reaches across that gap and lays on top of the sheet metal piece.
A friend of mine wanted to put a giant clump of clay moulding material in that whole area, then slowly carv out clay until thats exactly what you would have, all in one piece. Then experiment with different foams. Evem make the bottom out of a piece of acrylic, then the side walls and hood fence with foam. The bridge is easy to make.
.
You can see where I would put up walls on the side, and around the hood latch. Maybe some kind of material that could flex as the hood comes down on it, sealing it from top and bottom. Then the long strip "bridge" that reaches across that gap and lays on top of the sheet metal piece.
A friend of mine wanted to put a giant clump of clay moulding material in that whole area, then slowly carv out clay until thats exactly what you would have, all in one piece. Then experiment with different foams. Evem make the bottom out of a piece of acrylic, then the side walls and hood fence with foam. The bridge is easy to make.
.
#55
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Jan 2008
Location: Florida
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
First...I suck at editing pictures.......lol
You can see where I would put up walls on the side, and around the hood latch. Maybe some kind of material that could flex as the hood comes down on it, sealing it from top and bottom. Then the long strip "bridge" that reaches across that gap and lays on top of the sheet metal piece.
A friend of mine wanted to put a giant clump of clay moulding material in that whole area, then slowly carv out clay until thats exactly what you would have, all in one piece. Then experiment with different foams. Evem make the bottom out of a piece of acrylic, then the side walls and hood fence with foam. The bridge is easy to make.
.
You can see where I would put up walls on the side, and around the hood latch. Maybe some kind of material that could flex as the hood comes down on it, sealing it from top and bottom. Then the long strip "bridge" that reaches across that gap and lays on top of the sheet metal piece.
A friend of mine wanted to put a giant clump of clay moulding material in that whole area, then slowly carv out clay until thats exactly what you would have, all in one piece. Then experiment with different foams. Evem make the bottom out of a piece of acrylic, then the side walls and hood fence with foam. The bridge is easy to make.
.
I kinda get what you mean but all that area is needed for the bottom of the hood to latch into place. There is absolutley no room for much of anything else.
#60
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Jan 2008
Location: Florida
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
So instead of notching the plate (which I did on th first one and didn't like it), I took the rotozip and grinded the latchsupport structure down so the plate would fit nicely. Don't worry about the integrity of the latch support. That thing is completely over designed lol!!! Trimming the fat