Lets see them Aftermarket Steering Wheels
#83
Yep. Here is a separate topic regarding it, as I already received several PMs about vents:
https://ls1tech.com/forums/appearanc...-firebird.html
https://ls1tech.com/forums/appearanc...-firebird.html
Last edited by ALT-F13; 08-11-2014 at 09:56 AM.
#85
Just an FYI for the TA/Firebird guys... if you are not satisfied with the thin diameter wheel but like the factory look, get yourself a Camaro wheel. They fit exactly the same including the air bag and radio controls plus the wheel diameter is much more comfortable.
#87
I doubt airbags are still operational on my 19 year old GM built F body.
I recently replaced a faulty steering column ignition switch.
If I choose to replace my thin as a taxi cab steering wheel with yet another aftermarket upgrade, it's no big deal. RIP Pontiac.
I recently replaced a faulty steering column ignition switch.
If I choose to replace my thin as a taxi cab steering wheel with yet another aftermarket upgrade, it's no big deal. RIP Pontiac.
Last edited by Knightrider5000; 08-16-2014 at 01:17 PM.
#88
No not really. I bought the Momo Adaptor, then installed it. It was a little tight on the plastic column so I have access to a metal lathe and just turned the adapter down just a little bit. It kinda gave it a nice machined look so I liked that as well. But if you have a bench grinder or something like that if you took ur time to make sure you dont take too much off at one time you can make it fit. Or just file down the plasic inside the column.
#91
TECH Addict
iTrader: (17)
AAAAAAAND 40 minutes later you seem frustrated by not having a response yet. A bit silly. But then again this thread is 5 years old and your queston is being directed towards someone who may have not logged on in 4. Or may be dead. In either case, they quite likely could give 2 shakes of a rats ******* about it anyway.
please respond wit him 5 minutes or I'll post AGAIN!?!?!?!?!?
please respond wit him 5 minutes or I'll post AGAIN!?!?!?!?!?
#92
AAAAAAAND 40 minutes later you seem frustrated by not having a response yet. A bit silly. But then again this thread is 5 years old and your queston is being directed towards someone who may have not logged on in 4. Or may be dead. In either case, they quite likely could give 2 shakes of a rats ******* about it anyway.
please respond wit him 5 minutes or I'll post AGAIN!?!?!?!?!?
please respond wit him 5 minutes or I'll post AGAIN!?!?!?!?!?
#93
TECH Addict
iTrader: (17)
Welcome BTW
The following users liked this post:
CYPFREAK (11-16-2019)
#95
Copy & Paste Moderator
Here is the adapter:
http://www.ws6project.com/user_stor/...dapter-f-body/
https://www.hawksmotorsports.com/82-...-****-adapter/
Others used to carry it or one like it as well, but some of the links are broken now.
Contact the site to make sure they actually have them before ordering. The one at WS6 Project says the brand is "Mallory Billet Aluminum", but I don't think that company exists anymore.
Looks like Hawks Motorsports also has an ebay listing as well:
https://www.ebay.com/itm/381931766920
Here are a couple listings for an adapter for a C5 Corvette that may work as well, not sure:
https://www.ebay.com/itm/193208750973
https://www.ebay.com/itm/324700259487
http://www.ws6project.com/user_stor/...dapter-f-body/
https://www.hawksmotorsports.com/82-...-****-adapter/
Others used to carry it or one like it as well, but some of the links are broken now.
Contact the site to make sure they actually have them before ordering. The one at WS6 Project says the brand is "Mallory Billet Aluminum", but I don't think that company exists anymore.
Looks like Hawks Motorsports also has an ebay listing as well:
https://www.ebay.com/itm/381931766920
Here are a couple listings for an adapter for a C5 Corvette that may work as well, not sure:
https://www.ebay.com/itm/193208750973
https://www.ebay.com/itm/324700259487
Last edited by VIP1; 12-09-2021 at 12:24 AM.