Bought a GLASSTEk HOOD PIN ON AND IT fits like CRAP
#21
9 Second Club
Thread Starter
iTrader: (34)
Join Date: Mar 2005
Location: SPRINGFIELD MISSOURI
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
that front part is hard as hell to make it look right. lol I dont understand how you cant take a stock hood and use those measurments. I have a VFN on the trans am in my sig and it fits good I just had to readjust the brackets for the shocks. I understand things like that
#22
TECH Resident
Join Date: Jun 2008
Location: Gainesville, FL
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
maybe next time someone buys a hood. request that you can pay them through paypal. that way if it doesnt fit. you can file a dispute and it'll make their paypal balance negative until they refund your money. thats why i like buying off ebay and paying through paypal.
#27
TECH Apprentice
iTrader: (6)
Join Date: May 2003
Location: Fairfax County, VA (You know you're here when you see the bad roads)
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Man, I wish youd go after Glasstek on this. They should be allowed to get away with stuff like this. At least show them this thread. F -glasstek
#30
Holy hell buddy! thats terrible. I almost wanna call them and ask how there hood fits, then say "Oh never mind, I literaly just now read a post on a local car forum stating your hoods suck and fit like ****! Oh my god they have pictures too! LOL
#33
9 Second Club
Thread Starter
iTrader: (34)
Join Date: Mar 2005
Location: SPRINGFIELD MISSOURI
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
I hope they do. Its such Bullshit. I have been messing with this hood for a week or so. When I was researching hoods I called them and they basically lied about their product telling me how it just fits perfect. Thats why I made this post I dont want another fellow tech member get jacked. I know how to cut and mod some things but the common person doesnt know how or will have to pay good money to have it cut.
#34
TECH Apprentice
iTrader: (6)
Join Date: May 2003
Location: Fairfax County, VA (You know you're here when you see the bad roads)
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
I emailed them and got this reply.....
I was seriously looking in to buying a glasstek SS hood...but then I came across this thread:
https://ls1tech.com/forums/appearanc...like-crap.html
It doesnt appear like you guys stand behind your work. Also, it appears to be of substandard, almost un-useable quality.
What gives??
"Jese,
We Never told him that hood would fit perfectly out of the box...he ordered it with Torry the owner and he spoke with me Robert the co owner of galsstek...and neither one of us told him it did not need trimming...talk to any Chassis or body shop they would much rather trim a fiberglass hood than add to it if it was to be short...we make this hood to fit many different applications such as bowing it up to get a little more clearance...
some classes only allow that tall of a scoop but do not frown upon bowing it up a little wich at that point it needst to be bigger in all directions...
I spoke with him about being unhappy and told him if he was not happy with it We would give him a full Refund if he wanted to return it...he also said that a friend of his told him his fit perfectly without trimming...(not possible without sme trimming)
We make most of our pin on hoods / trunks a little oversized due to the nature of fiberglass shinkage and being too short...we use the best materials we can get to make our products a quality part that we would put on our own cars...
Thanks
Robert"
I was seriously looking in to buying a glasstek SS hood...but then I came across this thread:
https://ls1tech.com/forums/appearanc...like-crap.html
It doesnt appear like you guys stand behind your work. Also, it appears to be of substandard, almost un-useable quality.
What gives??
"Jese,
We Never told him that hood would fit perfectly out of the box...he ordered it with Torry the owner and he spoke with me Robert the co owner of galsstek...and neither one of us told him it did not need trimming...talk to any Chassis or body shop they would much rather trim a fiberglass hood than add to it if it was to be short...we make this hood to fit many different applications such as bowing it up to get a little more clearance...
some classes only allow that tall of a scoop but do not frown upon bowing it up a little wich at that point it needst to be bigger in all directions...
I spoke with him about being unhappy and told him if he was not happy with it We would give him a full Refund if he wanted to return it...he also said that a friend of his told him his fit perfectly without trimming...(not possible without sme trimming)
We make most of our pin on hoods / trunks a little oversized due to the nature of fiberglass shinkage and being too short...we use the best materials we can get to make our products a quality part that we would put on our own cars...
Thanks
Robert"
#38
12 Second Club
iTrader: (9)
Join Date: Feb 2007
Location: Lebanon, Mo.
Posts: 1,469
Likes: 0
Received 0 Likes
on
0 Posts
I emailed them and got this reply.....
I was seriously looking in to buying a glasstek SS hood...but then I came across this thread:
https://ls1tech.com/forums/appearanc...like-crap.html
It doesnt appear like you guys stand behind your work. Also, it appears to be of substandard, almost un-useable quality.
What gives??
"Jese,
We Never told him that hood would fit perfectly out of the box...he ordered it with Torry the owner and he spoke with me Robert the co owner of galsstek...and neither one of us told him it did not need trimming...talk to any Chassis or body shop they would much rather trim a fiberglass hood than add to it if it was to be short...we make this hood to fit many different applications such as bowing it up to get a little more clearance...
some classes only allow that tall of a scoop but do not frown upon bowing it up a little wich at that point it needst to be bigger in all directions...
I spoke with him about being unhappy and told him if he was not happy with it We would give him a full Refund if he wanted to return it...he also said that a friend of his told him his fit perfectly without trimming...(not possible without sme trimming)
We make most of our pin on hoods / trunks a little oversized due to the nature of fiberglass shinkage and being too short...we use the best materials we can get to make our products a quality part that we would put on our own cars...
Thanks
Robert"
I was seriously looking in to buying a glasstek SS hood...but then I came across this thread:
https://ls1tech.com/forums/appearanc...like-crap.html
It doesnt appear like you guys stand behind your work. Also, it appears to be of substandard, almost un-useable quality.
What gives??
"Jese,
We Never told him that hood would fit perfectly out of the box...he ordered it with Torry the owner and he spoke with me Robert the co owner of galsstek...and neither one of us told him it did not need trimming...talk to any Chassis or body shop they would much rather trim a fiberglass hood than add to it if it was to be short...we make this hood to fit many different applications such as bowing it up to get a little more clearance...
some classes only allow that tall of a scoop but do not frown upon bowing it up a little wich at that point it needst to be bigger in all directions...
I spoke with him about being unhappy and told him if he was not happy with it We would give him a full Refund if he wanted to return it...he also said that a friend of his told him his fit perfectly without trimming...(not possible without sme trimming)
We make most of our pin on hoods / trunks a little oversized due to the nature of fiberglass shinkage and being too short...we use the best materials we can get to make our products a quality part that we would put on our own cars...
Thanks
Robert"
#39
Staging Lane
iTrader: (2)
Join Date: Jan 2012
Location: Northern Va
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
That response is a bunch of bull ****, they say they make them over sized to fit different applications, wtf. They're all going on a damn 98-02 Camaro so make it fit one, if some one needs a taller one that's were the body shop should come in, not to just make it fit.
#40
Damn! That's a terrible fit. I'm sure now that it's here on TECH they will be more willing to work with you.
Maybe they should make them out of sheetrock, no shrinking and you could just rasp the edges, Hahaha! Hope it works out for you. I was just looking at there hoods and came across this. Thanks for the heads up.
Maybe they should make them out of sheetrock, no shrinking and you could just rasp the edges, Hahaha! Hope it works out for you. I was just looking at there hoods and came across this. Thanks for the heads up.