Solution to the RS Ground Effect Front Bumper Gap
#1
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Solution to the RS Ground Effect Front Bumper Gap
I have a 2002 Camaro with the factory RS ground effects kit on it. The more I look at the car, the more I can't stand the gap that is in the front bumper where the ground effects just randomly stop. I like the rest of the kit and want to keep it but I am look for something to fix the front bumper issue.
I have been looking at the RK Sport front valances and I kind of like those but I'm not sold on it. I was also thinking about getting a 6LE front splitter and just putting that on but I cannot find any pictures of people that have the RS kit and the splitter.
Just looking for ideas to do with the front bumper. I have looked around on the forums and haven't found anything I liked yet. Any ideas you have are much appreciated.
Here are some pictures of the car as it is now.
I have been looking at the RK Sport front valances and I kind of like those but I'm not sold on it. I was also thinking about getting a 6LE front splitter and just putting that on but I cannot find any pictures of people that have the RS kit and the splitter.
Just looking for ideas to do with the front bumper. I have looked around on the forums and haven't found anything I liked yet. Any ideas you have are much appreciated.
Here are some pictures of the car as it is now.
#2
TECH Veteran
iTrader: (4)
The 6le splitter does not extend down any lower than the body, so it does not flow with the side pieces. There is a front lip available from a company on eBay, someone here had a thread posted with pics of it installed. From what I recall of that lip, I don't really think it would flow too well with the factory stuff though.
Outside of the rksports lip, which flows well with the kit, you've got the wings west setup. Wings west has a front lip that will work, although it hangs down slightly lower I believe, it's still close enough to work with the factory kit. That is the route I considered with my old car.
Outside of the rksports lip, which flows well with the kit, you've got the wings west setup. Wings west has a front lip that will work, although it hangs down slightly lower I believe, it's still close enough to work with the factory kit. That is the route I considered with my old car.
#3
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I have considered all of them. They just all seem a little too ricey for me and I am looking for something a little cleaner. I already picked up an rksports lip but like I said I am just not sold on it.
#4
TECH Veteran
iTrader: (4)
Look up Cobrahunter on here. His car was pretty nice with the wings west kit. It was the only reason I considered swapping to that front lip.
Over the years though, I've come to appreciate the cleaner look of the camaro without any body kit. CME excluded.
https://ls1tech.com/forums/member.php?u=59116
Over the years though, I've come to appreciate the cleaner look of the camaro without any body kit. CME excluded.
https://ls1tech.com/forums/member.php?u=59116
Last edited by crimson_bird; 01-29-2014 at 10:29 PM.
#5
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the advise man. His is a nice car. Just not sure how I am feeling about either of the front bumpers though. I'll figure something out soon enough.
#7
Banned
iTrader: (56)
If you get a splitter from us just put in the notes you want TRANS AM HARDWARE. This makes it work with your GFX. It will make a line from the bottom of the GFX all the way across. There will still be a "hole" but there will be spacers there and it will channel air to the radiator...
Trending Topics
#8
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
If you get a splitter from us just put in the notes you want TRANS AM HARDWARE. This makes it work with your GFX. It will make a line from the bottom of the GFX all the way across. There will still be a "hole" but there will be spacers there and it will channel air to the radiator...
#11
Launching!
iTrader: (3)
Join Date: Jan 2008
Location: Ringgold, Georgia
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
If you get a splitter from us just put in the notes you want TRANS AM HARDWARE. This makes it work with your GFX. It will make a line from the bottom of the GFX all the way across. There will still be a "hole" but there will be spacers there and it will channel air to the radiator...
#13
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Guz. I have been trying find more pictures of that lip around but haven't found much their neither. I want to get a good idea of what it really looks like before I buy it. Seems like it flares a little too much when it reaches the wheel wells, at least imo.
#16
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
So found this picture when I was looking around. Took a while but I finally found one. Here is a link to the thread with other pictures of the car.
https://ls1tech.com/forums/multimedi...pix-today.html
He pin striped the edge of the splitter silver so that's why it stands out a little more.
https://ls1tech.com/forums/multimedi...pix-today.html
He pin striped the edge of the splitter silver so that's why it stands out a little more.
#18
TECH Veteran
iTrader: (4)
That's my buddies car. Last I recall he had removed the entire kit and was running a CME setup. Think he had painted the CME valence, Berger and his wheels a matte black as well. And he had beveled the edge of the splitter similar to what 6LE had as an option. He made the splitter himself. Think he also had one of the high rise spoilers on it now as well. Haven't seen him in a few months though, so I forget exactly.
#19
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I think this looks ok. I prefer the rk sport lip to this ones though. I cant find anything else that is similar to what I am looking for. Maybe something will turn up soon.
#20
Teching In
Thread Starter
Join Date: Aug 2013
Location: Myersville, MD
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts