ZL1 Style Hoods ON SALE NOW...
02-13-2014 | 09:45 PM
#1
Thread Starter
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
ZL1 Style Hoods ON SALE NOW... Inspired by the new ZL1 Camaro we wanted to offer products that you could convert your 1998-2002 Camaro into your own version of the ZL1, like this...
Having already offered the front and rear bumper and spoiler...
The last thing to complete the package was the hood, so here it is (IN THESE PICTURES IT IS NOT BOLTED ON, JUST LAID ON FOR PICS SO FITMENT IS BETTER THAN WHAT YOU SEE)...
Now we did NOT private label this piece. Therefore it in our eyes has issues you should be aware of that we would have not incorporated into the design. The biggest one being it was made overseas and they didn't pay attention to the BOTTOM of the hood.
They molded it off of a stock hood and LEFT the center bar HALF way in (literally they just cut HALF of it for the scoop and left the other half just HANGING there).
SO, you will need to trim part of the bottom of the hood. We also recommend you sand the etched line on the top of the hood some to make it more defined. Other than that it will take the normal prep work any overseas fiberglass hood requires.
All said and done less than an hour of prep work and you'll have an awesome hood!
Manufacturer tries to keep them in stock but most are already sold (by us) before they hit the warehouse. So worst case expect 4-6 weeks for shipment but it is usually 2-4 weeks, thanks!
1998-2002 Camaro...
http://6litereaterdesigns.com/store/...roducts_id=564
1993-1997 Camaro...
http://6litereaterdesigns.com/store/...roducts_id=565
1982-1992 Camaro...
http://6litereaterdesigns.com/store/...whitespace.jpg
1982-1992 Firebird...
http://6litereaterdesigns.com/store/...whitespace.jpg
There's literally only like two of each in stock so if you want one order asap. We're obviously not the only vendor but we've offered the lowest price
Having already offered the front and rear bumper and spoiler...
The last thing to complete the package was the hood, so here it is (IN THESE PICTURES IT IS NOT BOLTED ON, JUST LAID ON FOR PICS SO FITMENT IS BETTER THAN WHAT YOU SEE)...
Now we did NOT private label this piece. Therefore it in our eyes has issues you should be aware of that we would have not incorporated into the design. The biggest one being it was made overseas and they didn't pay attention to the BOTTOM of the hood.
They molded it off of a stock hood and LEFT the center bar HALF way in (literally they just cut HALF of it for the scoop and left the other half just HANGING there).
SO, you will need to trim part of the bottom of the hood. We also recommend you sand the etched line on the top of the hood some to make it more defined. Other than that it will take the normal prep work any overseas fiberglass hood requires.
All said and done less than an hour of prep work and you'll have an awesome hood!
Manufacturer tries to keep them in stock but most are already sold (by us) before they hit the warehouse. So worst case expect 4-6 weeks for shipment but it is usually 2-4 weeks, thanks!
1998-2002 Camaro...
http://6litereaterdesigns.com/store/...roducts_id=564
1993-1997 Camaro...
http://6litereaterdesigns.com/store/...roducts_id=565
1982-1992 Camaro...
http://6litereaterdesigns.com/store/...whitespace.jpg
1982-1992 Firebird...
http://6litereaterdesigns.com/store/...whitespace.jpg
There's literally only like two of each in stock so if you want one order asap. We're obviously not the only vendor but we've offered the lowest price
Trending Topics
02-14-2014 | 04:26 PM
#11
Originally Posted by 6LITEREATER
They molded it off of a stock hood and LEFT the center bar HALF way in (literally they just cut HALF of it for the scoop and left the other half just HANGING there).
02-15-2014 | 12:20 PM
#14
The design of that hood is an utter train wreck, none of the angles match the car at all. You weren't kidding Mark when you said they never even see a real car.
I spent 20 minutes in photoshop correcting things. Now it looks "ok". I say just ok because I dont think this design works on a 4th gen at all, but thats just my subjective opinion I am sure many will disagree with.
I spent 20 minutes in photoshop correcting things. Now it looks "ok". I say just ok because I dont think this design works on a 4th gen at all, but thats just my subjective opinion I am sure many will disagree with.
02-18-2014 | 10:29 PM
#18
Thread Starter
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
The design of that hood is an utter train wreck, none of the angles match the car at all. You weren't kidding Mark when you said they never even see a real car.
I spent 20 minutes in photoshop correcting things. Now it looks "ok". I say just ok because I dont think this design works on a 4th gen at all, but thats just my subjective opinion I am sure many will disagree with.
I spent 20 minutes in photoshop correcting things. Now it looks "ok". I say just ok because I dont think this design works on a 4th gen at all, but thats just my subjective opinion I am sure many will disagree with.
