Completed Wire Mod: Tutorial Inside
#142
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah...the hard vac line coming off the harness...I knew about that one. I was talking about the larger hoses going from the firewall to back behind/under the PCM. I guess they are the heater hoses, but I thought it was AC lines. Either way it gave me an idea. LOL
#144
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I plan on keeping the AC.....I even have a couple cars that previous owners deleted the HVAC system from that I may add it all back. It get's too hot down here not to have it in a daily driver. Your picture gave me an idea about possibly hiding most of the AC and heater hoses though. I know some custom hoses would need to be built, but most local NAPA or Bumper To Bumper stores can make those.
#152
TECH Fanatic
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
1-3/4 Bi-Metal hole saw. Lowes has them and it gets the job done very well. Just did a friend's car this past weekend actually.
![Name: 4B1A365D-FBD6-44FD-AF2F-13D0B9104CC7_zpsklhiu0ne.jpg
Views: 520
Size: 180.3 KB](https://ls1tech.com/forums/attachments/appearance-detailing/657758d1501528127-completed-wire-mod-tutorial-inside-4b1a365d-fbd6-44fd-af2f-13d0b9104cc7_zpsklhiu0ne.jpg)
#153
TECH Veteran
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I always thought you had to remove the fender to do this. I may be doing this soon, I relocated my passenger coils to the batterly location, and routed the wire bundle on the frame rail and Im not a fan of how it turned out. This would allow me to hide it all though I will end up with some excess wire because of it though
#154
TECH Fanatic
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I always thought you had to remove the fender to do this. I may be doing this soon, I relocated my passenger coils to the batterly location, and routed the wire bundle on the frame rail and Im not a fan of how it turned out. This would allow me to hide it all though I will end up with some excess wire because of it though
#159
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
1 3/4 hole saws, connector disassembly....yikes, some of you guys are making a mountain out of a mole hill, lol.
IIRC, I used a 1" hole saw, drilled two holes side by side keeping in mind the width of the widest plug connector and some play room for the next connector sharing the wiring from feeding the first harness through. Blend both holes together using a die grinder so that now you have a slot. Smooth rough edges, prep with paint, modify a grommet, start feeding wires.
IIRC, I used a 1" hole saw, drilled two holes side by side keeping in mind the width of the widest plug connector and some play room for the next connector sharing the wiring from feeding the first harness through. Blend both holes together using a die grinder so that now you have a slot. Smooth rough edges, prep with paint, modify a grommet, start feeding wires.