Appearance & Detailing Interior & Exterior Appearance Modifications

Anyone without a Porter Cable DA buffer...

Thread Tools
 
Search this Thread
 
Old 05-25-2004 | 08:05 PM
  #1  
PFDarkside's Avatar
Thread Starter
Launching!
 
Joined: Jul 2003
Posts: 249
Likes: 0
From: Somewhere around Detroit...
Default Anyone without a Porter Cable DA buffer...

Buy one! I used mine for the first time today and it's an awesome tool for detailing. I used Meguiars #9 (Swirl Mark Remover), #81 (Hand Polish) and #26 (High-tech yellow wax) and the WS6 looks really good. I need to go back and use #83 (Dual Action Cleaner Polish) to get the bigger scrathes, but the smaller swirls are gone and it was a breeze. The PC doews all the hard work (polishing/buffing) allowing you to easily remove it with a MF towel.

I bet that even most of you Zaino guys have some scrathes/swirls that could use a PC and either #83 or Menzerna polish to really get that paint to glow under the Zaino.

For the PC:
http://www.coastaltool.com/cgi-bin/S...8f9+1085610304

For the Pads/MF towels:
www.pakshak.com
Old 05-26-2004 | 08:31 AM
  #2  
PSU_Engineer's Avatar
TECH Enthusiast
 
Joined: Aug 2003
Posts: 658
Likes: 0
From: E-town, PA
Default

You could also recommend the Porter Cable 7336 that is available from Lowes. Their price: $109.00 + tax. Same machine as the 7424, but it includes the sanding disc, and 1 buffer pad. Available as close as your local Lowes home center. I have one, and it does great!!!

I'll Repeat. The 7336 is the SAME basic machine as the 7424!!!

Tony
Old 05-26-2004 | 08:34 AM
  #3  
bigoneZ28's Avatar
Launching!
 
Joined: Oct 2002
Posts: 224
Likes: 0
From: Cayman Islands
Default

I received the PC7424 Ultimate Detailer kit with pads from CMA two weeks ago. Finally got a chance to do a practice run on my wife's '94 Honda Civic last week.

1. Washed car with Dawn soap, rinsed and dried.
2. Meguair's Quik Detail clay bar paint cleaning system.
3. Meguair's MPPC with yellow pad @ 3.5 setting
4. Meguair's #9 SMR with white pad @ 4.5 setting
5. Meguair's NXT Tech Wax with microfibre applicator.

Final buff with microfibre detail cloth.

All in all, the job turned out good for a newbie's first try

I look forward to detailing the Camaro, but will do another practice run on my F-150....never really detailed at this level but well kept with regular washing and waxing.

Definitely get a PC..it is a pleasure and you'll be looking for friends' cars to detail if you don't have enough

Tony

Last edited by bigoneZ28; 05-26-2004 at 10:33 AM.
Old 05-26-2004 | 08:52 AM
  #4  
chupr0kabra's Avatar
TECH Junkie
iTrader: (10)
 
Joined: Jan 2004
Posts: 3,778
Likes: 0
From: Pearland, TX
Default

I bought the 7336 from Lowes for $110. Great deal and I got it locally. Finding pads for it is a little tough locally, so I bought the velcro back palte and Menzerna kit (orange pad, whie pad, two microfibre towels and two microfibre applicators) from Properautocare.com

I will warn you, once you start using one, you will become even more obsessed about your car's appearance than before. I spent the entire weekend working on my whole car, and I've still got a few spots where I want to spend some more time.


-Mike

Last edited by chupr0kabra; 05-26-2004 at 09:46 AM.
Old 05-26-2004 | 08:56 AM
  #5  
VoodooWS6's Avatar
TECH Enthusiast
 
Joined: Feb 2004
Posts: 552
Likes: 0
From: Naperville, IL
Default

I just got the same system as Mike above (menzerna twins and PC kit). Can't wait to try it!!
Old 05-26-2004 | 09:30 AM
  #6  
PFDarkside's Avatar
Thread Starter
Launching!
 
Joined: Jul 2003
Posts: 249
Likes: 0
From: Somewhere around Detroit...
Default

Originally Posted by PSU_Engineer
You could also recommend the Porter Cable 7336 that is available from Lowes. Their price: $109.00 + tax. Same machine as the 7424, but it includes the sanding disc, and 1 buffer pad. Available as close as your local Lowes home center. I have one, and it does great!!!

I'll Repeat. The 7336 is the SAME basic machine as the 7424!!!

Tony
Yeah....

But through Coastal Tools they also include a 6" counterweight and a hook and loop pad as well. I figured since I was ordering products and pads online, I might as well order the PC online as well too... (Same shiiping time, and I wouldn't have to go to the store at all)

I was a little nervous about using for the first time, but really is nearly foolproof. I can't wait now to use the heavier duty DACP to get some of the scratches. This makes that one part of detailing (application/hardcore polishing) fun too. It's always fun to wash, dry, and buff out to a shine, but that elbow grease is in short supply some nights after work.
Old 05-27-2004 | 05:37 PM
  #7  
Steve1969LS1's Avatar
TECH Veteran
iTrader: (1)
 
Joined: Dec 2001
Posts: 4,274
Likes: 2
From: Anaheim Hills, CA
Default

I LOVE my PC unit.. its the best detailing tool ive ever bough.. i use the Meguires pads and I also use the micro-fiber bonnets they make for it..

a wise investment
Old 05-27-2004 | 07:18 PM
  #8  
DARK AGE 53's Avatar
TECH Fanatic
 
Joined: Nov 2001
Posts: 1,757
Likes: 0
From: Mi./Al.
Default

Got mine from www.costaltool.com also, for me it was a little better going though them then getting the one from Lowes. JMO

Al
Old 05-27-2004 | 07:36 PM
  #9  
PendragonZ's Avatar
Chop-Foo Director
 
Joined: Apr 2002
Posts: 4,709
Likes: 0
From: Haymarket, Virginia
Default

This is my next investment. So far, all my detailing has been done by hand. I can't wait to get one and get more serious than I already am.
Old 05-27-2004 | 08:37 PM
  #10  
SuperBuick's Avatar
TECH Apprentice
 
Joined: Feb 2003
Posts: 377
Likes: 0
From: WY
Default

Its awesome to see how many of you guys are getting these. When I first got on here it was only me and about 5 others that had "PCs". If I had to answer the question of "what is the best detailing product" with one thing, I would say it is the Porter Cable 7424/7336.

If you have a PC and you haven't tried Menzerna Polishes I cannot stress enough how highly I recommend you give them a try. They are filler-free, foolproof, and produce results on your paint that is nothing short of amazing. Give them a try.

-Tom
Old 05-27-2004 | 11:00 PM
  #11  
gavspurplez's Avatar
TECH Enthusiast
iTrader: (6)
 
Joined: May 2004
Posts: 747
Likes: 0
From: Elgin
Default

i used menzerna for the 1st time 2 days ago and the results are beyond words. if it was not for fishing around on these sites and reading posts i would have never found out about this stuff. i followed up the menzerna twins with some wolfgang sealant. my car has never looked this good and the minute i start geting swirls again, the menzerna and PC are coming out
Old 05-28-2004 | 10:47 AM
  #12  
Tudds's Avatar
TECH Junkie
iTrader: (4)
 
Joined: Sep 2002
Posts: 3,365
Likes: 1
From: Long Island, NY
Default

So basically, you put something like 3m Handglaze on the car and wizz it away with this thingy?
Old 05-28-2004 | 10:53 AM
  #13  
SuperBuick's Avatar
TECH Apprentice
 
Joined: Feb 2003
Posts: 377
Likes: 0
From: WY
Default

pretty basically - properautocare has a pretty detailed and accurate writeup on removing swirls using the PC

http://www.properautocare.com/usporcabpol.html

-T
Old 05-28-2004 | 11:06 AM
  #14  
GTP LS1's Avatar
On The Tree
 
Joined: Nov 2001
Posts: 138
Likes: 0
From: Germantown, Maryland
Default

I recently purchased a PC at Lowes. I ordered all the other things through CMA:
1 orgage pad
1 yellow pad
2 white pads
1 grey pad
Menzerna IP & final polish
5 inch flex backing plate

This weekend I will be detailing my 18 year old daily driver. The paint needs a lot of help. Last weekend I hit the trunk lid with the Menzerna IP and it was a huge improvement. I only spent a few minuntes on the task. I can't wait to see what it will look like after I really go at it.

I also bought a bunch more lights for my garage. I really want to be able to see all the defects in the paint.
Old 05-28-2004 | 12:03 PM
  #15  
PFDarkside's Avatar
Thread Starter
Launching!
 
Joined: Jul 2003
Posts: 249
Likes: 0
From: Somewhere around Detroit...
Default

Originally Posted by Tudds
So basically, you put something like 3m Handglaze on the car and wizz it away with this thingy?
Yes, but imagine a little more aggressive polish... it is enough to remove swirls but the random and non-circular motion basically emulate hand polishing but much quicker, easier and won't introduce new paint defects.

If you want a sweet looking car and have some extra change, I stongly advise you to pick one up.
Old 05-28-2004 | 03:17 PM
  #16  
gavspurplez's Avatar
TECH Enthusiast
iTrader: (6)
 
Joined: May 2004
Posts: 747
Likes: 0
From: Elgin
Default

PC

Old 05-29-2004 | 09:53 AM
  #17  
Tudds's Avatar
TECH Junkie
iTrader: (4)
 
Joined: Sep 2002
Posts: 3,365
Likes: 1
From: Long Island, NY
Default

I think I'm gonna get one... my gf's mom works at Lowes!!!
Old 05-30-2004 | 01:42 AM
  #18  
Brandon Boomhauer's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
Default

Originally Posted by Tudds
I think I'm gonna get one... my gf's mom works at Lowes!!!
havent we been trying to convince you for a while? or am i thinking someone else?


btw I love my PC! The other day I washed my car and had water spots like holy hell on it, even though I had just put a coat of wolfgang on less than a week before the rain, it make some hellacious spots. a little work with FP and they were gone and it looks better than when i first did the hood. May be looking elsewhere for a final sealant. I need to order a few more pads this week, the orange pad that came in the menz kit isn't really my favorite. I think I'll get some of the lake country pads from pakshak along with a few more MFs.

I'd like to try some of the black or grey pads, to apply the final selant instead of doing it by hand, just have to find the most non abrasive pad.

I would have to say if you have a darker colored car a pc is almost mandatory if you haven't taken amazing care of it from the start.
Old 05-30-2004 | 01:08 PM
  #19  
VoodooWS6's Avatar
TECH Enthusiast
 
Joined: Feb 2004
Posts: 552
Likes: 0
From: Naperville, IL
Default

Now that I did the car this weekend, I have to say I could NOT believe how wonderful the PC and Menzerna made my paint look!!!! Simply amazing!
Old 05-30-2004 | 02:14 PM
  #20  
Tudds's Avatar
TECH Junkie
iTrader: (4)
 
Joined: Sep 2002
Posts: 3,365
Likes: 1
From: Long Island, NY
Default

whats menzerna?


Quick Reply: Anyone without a Porter Cable DA buffer...



All times are GMT -5. The time now is 01:12 AM.