Fast94

iTrader: (3)

Let's try this again..

I'm not a huge fan of them..I think they are a little overdone. But I need to mount at least 3 gauges (all being used..non ricer style ) I also don't want to hack out the vents and put them there..the gauges look ok like that in a TA..but not so much in a Camaro.

Does anyone have any pictures of a tripple gauge pod/pillar in their car? Can anyone post pics?

I'm just curious to see what you guys think of them..I don't base what I do to my car on other peoples opinions, so this is just to get a feeling of what you guys think..Are there any other creative places to put gauges?

D Rock

iTrader: (7)

They serve a purpose so why not, I also think they look pretty cool.

Flawless02SS

iTrader: (9)

Camaro_SLP: I was thinking the same thing you where thinking, how 3 gauges in the A pillar may look a little overdone. I also have 3 gauges to mount. I plan to mount 2 in the A pillar and one by the cig. lighter. I will make a custom black plastic panel to cover the opening to the left of it.

Smitty

not a fan of pillar gauges

2K2CamaroSS

iTrader: (18)

Here's my cobalt ones:

GotV-8

iTrader: (15)

I agree looks good, I myself have had people comment on mine a number of times. Only bad thing I found at first you have to get use to them blocking the view a little.

BIG_MIKE2005

iTrader: (116)

I have a set in my Probe GT & I just recieved my Triple pillar from a member on here today. Can't wait to get my silver faced Autometer gauges in there.

monicaz28

iTrader: (5)

I voted that they're too much, but I didn't realize you were actually going to need them... Definitely get one. If you have 3 gauges, it would be dumb to get a 2 gauge pillar and mount the other one somewhere else. the dash would get cluttered looking IMO.

WestSide

iTrader: (6)

mmmmmmmmmmmmmmmmmm cobalt gauges mmmmmmmmmmmmmmmmmmmmmm

SLP LS1

Gauge pillars are overdone!

Urban Legend

iTrader: (5)

Go with whats vital and needed. Not no bs gauges that you do not need. Maybe 2 if possible could be enough.

Randy WS6

iTrader: (69)

carbon fiber

libertine1015

iTrader: (5)

I like them if they have a boost gage in them and no AFR gage.


just my opinion.

LiquidFire350

iTrader: (8)

i like the 3 gauge pillar, but if you dont want 3, try this, its a picture from Speed Inc.'s shop car

00badfnta

iTrader: (5)

I have them and I personaly like them. Easy to install and to uninstall. Makes it look badass.

MountainMotor

iTrader: (2)

I like'em! Hey Randy WS6 how much do you have in your pillar and gauges? That's close to the set-up that I was planning on using. I like the Cobalt gauges but the Carbon Fiber are my favorite.

Randy WS6

iTrader: (69)

A round $350.00 for every thing and they look better than the pic. they are top notch gauges.

CrabhartLS1

If you don't want to hack into the rest of your dash, A piller triples are the way to go. As long as you don't have to look at all 3 at the same time, you're good.

A nitrous guage, a trans temp guage, and a A/F ratio guage for example would be good, because you would normally only look at one of those during a race. You would look at the A/F while tuning, the trans temp after races/while tuning, and the nitrous while tuning. As long as you prioritize them, there's no reason it can't work.

BIG_MIKE2005

iTrader: (116)

Fuel pressure is also a good one if your running boost or nitrous. Seein as how a loss of fuel pressure can effect alot. Its also good to know if your running too lean/rich at WOT even if your running N/A.

Pipelayaz

iTrader: (2)

I was searching and I couldn't find where to buy the triple guage A-pillar. I found it before but now I can't find it. Can someone help me out.