GoFast908Z

iTrader: (12)

Is it possible to swap out the current 3spoke GM steering wheel onto an Fbody?

I would prefer a C6Z one as they are much thicker.

question 1: Will the airbag still be able to be connected and work?

question 2: with the different centercaps on the various models, how easy is it to remove and replace?

GoFast908Z

iTrader: (12)

anyone?

GoFast908Z

iTrader: (12)

so nobody on here has ever thought/tried swapping a vette wheel?

TTT

kaos_

iTrader: (12)

i think someone had posted about this a while back and if i remember correctly it won't work. not sure why. but don't quote me on that, do more research. you might be able to pull the thread under search.

GoFast908Z

iTrader: (12)

any suggestions on the search, cuz i've tried numerous searches.


Oh and saying that it can't be done.....just tempts me to try harder.

kaos_

iTrader: (12)

well, it CAN be done, just probably not as practical, or cheap, as we'd like for it to be (pop stock wheel off, pop vette wheel on). if i find anything i'll certainly post it...

VIP1

JasonWW tried using a GM truck wheel with wood inserts and it didnt fit.

Here are the threads:
https://ls1tech.com/forums/appearance-detailing/620307-anyone-seen-wood-grain-steering-wheel.html
https://ls1tech.com/forums/showthrea...5&page=3&pp=20

That doesnt mean that another wheel wont fit though.

ProjectCamaro

iTrader: (26)

I've thought of it and made a post about it.

https://ls1tech.com/forums/appearance-detailing/633835-c6-steering-wheel-fbody.html

GoFast908Z

iTrader: (12)

Found out today that the C6 and the C6 Z06 steering wheels are different part numbers. I'll go with a tape measure next week and measure the thickness of the wheel.

ProjectCamaro

iTrader: (26)

Sounds good, keep us updated. I really hope this will work. It'll make the interior look 100x better.