Replaceing SS emblems! I need some Measurements !
Replaceing SS emblems! I need some Measurements ! I have just gotten the SS repainted. I was wondering if anyone knew the exact measurements or how far in on the front fenders and above the side molding body lines. I removed the side moldings but this would give me a good idea where the SS emblems are supposed to be placed. Along with the measurements on the rear where the bowtie and SS emblem goes on there. I should have done this while the emblems where still on the car but I forgot about it.
I know that I could just eyeball it but, I'm a perfectionist with my car so I want it to be as correct as possible. If anyone can help me out on getting them replaced in their correct locations I would greatly appreciate it!
TIA!
I know that I could just eyeball it but, I'm a perfectionist with my car so I want it to be as correct as possible. If anyone can help me out on getting them replaced in their correct locations I would greatly appreciate it!
TIA!
Hey bro thats awesome you took the time to take those! Greatly Appreciated!
Maybe someone will chime in with a rear measure and I will be ready to roll!
Thats the reason I'm such a big fan of this forum. Members go the extra step to give someone a hand!
Maybe someone will chime in with a rear measure and I will be ready to roll!
Thats the reason I'm such a big fan of this forum. Members go the extra step to give someone a hand!
Last edited by HILL_SS; Sep 27, 2007 at 11:08 AM.
TECH Apprentice
Joined: May 2007
Posts: 381
Likes: 0
From: Montgomery County, MD
Well if no one posts the measurements by the time I get back from school this weekend I measure it out for you and take pictures. Until then hope someone comes in with a measurement.
I just did this the other day for someone that was asking about the same thing.
In the first pic it is 1.5" from the bottom of the emblem to the top of the molding and 4.125" from the emblem to the edge of the fender where the line is drawn.
I think this pic is self explanatory
In this pic, it is 6.875" from the edge of the "O" to the bottom corner of the bowtie emblem.
In the first pic it is 1.5" from the bottom of the emblem to the top of the molding and 4.125" from the emblem to the edge of the fender where the line is drawn.
I think this pic is self explanatory
In this pic, it is 6.875" from the edge of the "O" to the bottom corner of the bowtie emblem.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by LawmanSS
LS1DER...great pics! I added your post to the "Hall of Fame" sticky for future reference.
https://chrome.google.com/webstore/d...bifiaedg?hl=en
...that worked on my PC
