6litereater Designs Projects, Suggestions, and Feedback Thread
#341
TECH Fanatic
iTrader: (3)
Join Date: Aug 2004
Location: holding down the couch
Posts: 1,458
Received 0 Likes
on
0 Posts
I'd be in for one of the gauge plates. It wouldn't need the lighter outlet, there is the (semi-useless) spare under the e-brake handle. Or what about a surround/mount for double din head units? Not sure how feasible that would be.
#345
TECH Resident
iTrader: (2)
Join Date: Mar 2006
Location: England
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
How about a disc to fill over the cup holder in the center consol? (And rears) Would need a emblem in them though.
Or mabey a cover for the !cig lighter mod !!
Dunno, just throwing out a couple of mabeys....
A rear diffuser would look sick!
Or mabey a cover for the !cig lighter mod !!
Dunno, just throwing out a couple of mabeys....
A rear diffuser would look sick!
#348
TECH Fanatic
iTrader: (17)
How about this.....
http://camaroboy9602.50megs.com/cgi-...interior/6.jpg
The gauge cluster to hold Autometer gauges
http://camaroboy9602.50megs.com/cgi-...interior/6.jpg
The gauge cluster to hold Autometer gauges
#349
Well Id only expect the two ***** on the right, and they might be smaller, but I've seen it done and know it would fit. The fan speed is just a simple electrical switch that could be much smaller or a slider type thing.
#350
TECH Addict
iTrader: (27)
I am down for a cupholder delete. But what I would really like that nobody has that I can find for a decent price (if I can find at all) are emblems. I do not care if they are plastic, ABS plastic can be sanded, primed and painted for a good effect. Here's a few I'd be interested in and some other motor swap guys may like as well:
6.6L or 6.6 liters (this would be for anyone with a 400-408ish sized motor)
402 cubic inches or 402 C.I.
408 '' ''
370 '' ''
6.0L or liter
402 or 408 stroker
Anything like that. I am not talking about etching, just individually cut letters/numbers. If itd be possible to leave a small thing piece at the bottom connecting them all that'd be ideal, if not, its still all good.
6.6L or 6.6 liters (this would be for anyone with a 400-408ish sized motor)
402 cubic inches or 402 C.I.
408 '' ''
370 '' ''
6.0L or liter
402 or 408 stroker
Anything like that. I am not talking about etching, just individually cut letters/numbers. If itd be possible to leave a small thing piece at the bottom connecting them all that'd be ideal, if not, its still all good.
#355
TECH Fanatic
iTrader: (6)
Join Date: Jan 2007
Location: Calabasas, CA
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Mark, this might sound kinda retarded, but i have had the hardest time finding a piece of blank ABS any larger than 12" x 12". if you could sell blank sheets that are 18"x12" or 24"x12" that might be helpful.
when i did my tail lights i ended up using plexi because i got impatient and couldnt find a large enough piece of ABS.
when i did my tail lights i ended up using plexi because i got impatient and couldnt find a large enough piece of ABS.