CR00SS

I`ve just finished building my 94z 355lt1 with cleaned up heads/intake 11.1:1 compression comp cam 233/239 546/576 112! I just threw something together with parts I`ve had forever! I`m just trying to find out what size stall you guy`s recommend me getting for my full manual th350 with 3.42 rear gears! I`d would like to get the best bang for the buck! Also post up some of your times with a3`s and ps this is mainly a play toy/race car! Thanks

screamin86

iTrader: (13)

check out redneck performance converters. i have one that i had in my 82 t/a and am putting it in my 86 t/a behind the 5.3 im swaping in. mine is a 9.5in 3500 converter with balloning plates i thought it was very driveable. i told them when they built it that it was strictly a street car that i beat on reguarly paid $299 shipped.

CR00SS

I`ll check that out! Thanks! Have you run any times on your car yet!

screamin86

iTrader: (13)

no not yet i ran that converter in my old car for about 6months and it was great with the motor it had it would have been in bolton ls1 territory which isnt bad for only having 2500 in the car but im still in the process of gathering parts for my swap into my 86 car.

Wicked94Z

iTrader: (26)

i'd run a ~4000 stall with that cam and more gear.

FTICONVERTERS

iTrader: (3)

we offer several different converters that might suit your budget. look at www.fticonverters.com or give me a call at 1-866-726-8358


Greg

Z28/2002

iTrader: (27)

I've got a PTC in my TA and couldn't be happier.

toytech93

iTrader: (2)

I'd recommend 3500 , but if its just a toy GO BIG. ~4000 stall and 3.73 or 4.11 gears

krissoto

iTrader: (3)

I have a 3700-4100 with anti balloon plate for da squeeze and a TB...TransSpecialties

Iron Ryan

Hughes 4000

3rdgen92maro

iTrader: (20)

I run a Yank 4k and couldnt be happier with it. I would go with atleast a 4k and more gear if its a more strip then street car.