texas_240

Im doing a stage one rebuild on my 2004 4L60e behind an LM7 in my 1993 Volvo 240 station wagon. When putting the case on end and removing all the internals I found this tiny little "thing" that looks like an old school revet/ mushroom laying at the bottom of my oil pan collector. I have no idea what part of the trans it goes too and I also found an eight check ball and I know theres only suppose to be 7 in the valve bodies. Any help would be great. First few people to give some solid answers I'll send payal money for a 6 pack of beer. Really!!!

98CayenneT/A

No picture

texas_240

showing up for me. Let me check my flickr tag

texas_240

Is the photo showing up now?

98CayenneT/A

yes, and I do not recognize that piece at all

performabuilt

iTrader: (25)

7 checkballs in the valve body 1 in the case at accumulator. As for the small piece really no idea never seen that in a 4l60e

texas_240

Is this where it goes, the oblong'd shape hole to the right of my finger?

MaroonMonsterLS1

Do you have a size reference for the piece? Can't tell how big it really is.

First glance looks like an old attmepted fix for the input drum to replace the checkball but I can't tell for sure. I could be way off base. Get a pic of the input drum...shaft side

TexasTandGranSport

testing the check ball seal

what that hole does, some knowledge from clinebarger on another board

Jays_SSZ28

iTrader: (2)

Lets see how far off topic we can go.

texas_240

coryforsenate

iTrader: (1)

What is it?

texas_240

Based on what performabuilt said I was able to google that eight check ball and we think that mushroom looking thing could be a rivet that never got pressed so moving on. Not sure what its from but Im not going to worry about it.

MaroonMonsterLS1

So you didn't really find your answer...you just decided to not care about it and move on

texas_240

Pretty much, I was unable to find the answer on that little rivet so Im moving on and not caring