4.56s installed! - and a broken tranny :(
#1
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
4.56s installed! - and a broken tranny :(
After having them sit around for about 2 months, I finally had to time install the 4.56s (thank god school is out. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> ) I also installed a new prototype Mcleod Revlok II setup while the car was apart. The clutch grabs very well and the gears are flat out fun to drive around town with.
I took it easy on them for 100 miles before really laying into them. When I had some room in traffic, I downshifted to 2nd and laid into it. Hit 3rd gear and the car got sideways. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Traffic was pretty far ahead, so I went to hit 4th and that's when all hell broke loose. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> I heard some grinding and figured I missed a gear, but it just didn't sound right. I put it in 4th gear to cruise along and let out the clutch, but nothing happened. I gave it gas, but the car just revved up like it was in neutral. It was like this in all the gears. <img border="0" alt="[fight]" title="" src="graemlins/gr_punch.gif" /> I could even put it in every gear without the clutch. LOL No resistance or anything. It was pretty messed up. I had it towed to the shop and I pulled the tranny back out and took it apart. It looks like the key that holds the 3/4 syncronizer to the hub broke. I found half of it in on the magnet in the rear of the tranny. <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" /> Oh well, it needed to be rebuilt anyways as it was popping out of 3rd gear real bad. Hopefully, I'll be back on the road soon.
For the 100 miles I had the gears, they were a blast. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I can't wait to get a tranny back in the car.
Jason
<small>[ May 23, 2002, 02:50 AM: Message edited by: Jason99T/A ]</small>
I took it easy on them for 100 miles before really laying into them. When I had some room in traffic, I downshifted to 2nd and laid into it. Hit 3rd gear and the car got sideways. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Traffic was pretty far ahead, so I went to hit 4th and that's when all hell broke loose. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> I heard some grinding and figured I missed a gear, but it just didn't sound right. I put it in 4th gear to cruise along and let out the clutch, but nothing happened. I gave it gas, but the car just revved up like it was in neutral. It was like this in all the gears. <img border="0" alt="[fight]" title="" src="graemlins/gr_punch.gif" /> I could even put it in every gear without the clutch. LOL No resistance or anything. It was pretty messed up. I had it towed to the shop and I pulled the tranny back out and took it apart. It looks like the key that holds the 3/4 syncronizer to the hub broke. I found half of it in on the magnet in the rear of the tranny. <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" /> Oh well, it needed to be rebuilt anyways as it was popping out of 3rd gear real bad. Hopefully, I'll be back on the road soon.
For the 100 miles I had the gears, they were a blast. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I can't wait to get a tranny back in the car.
Jason
<small>[ May 23, 2002, 02:50 AM: Message edited by: Jason99T/A ]</small>
#3
!Dial-up Director
Re: 4.56s installed! - and a broken tranny :(
Well damn I thought it would hold out on you a little longer <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> Glad to hear the gears are fun though. Maybe Tim H will let you jump in front of him in line for the rebuild. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#4
10 Second Club
iTrader: (2)
Re: 4.56s installed! - and a broken tranny :(
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Jsears8:
<strong> Maybe Tim H will let you jump in front of him in line for the rebuild. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Dream on slowboy
Sorry to hear about your tranny though. Now get in line.
Tim H.
<strong> Maybe Tim H will let you jump in front of him in line for the rebuild. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Dream on slowboy
Sorry to hear about your tranny though. Now get in line.
Tim H.
#7
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.56s installed! - and a broken tranny :(
Justin, I think I'm going to take your advice and just get one from Valvegod. This way, I'll have a spare T56 for parts, etc. I'll probably get this one rebuilt and we can share it since we seem to go through tranny's quite a bit. LOL <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" /> So, I don't think I'll be taking Tim's place in line w/ Sammy.
Trending Topics
#8
10 Second Club
iTrader: (2)
Re: 4.56s installed! - and a broken tranny :(
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Jason99T/A:
<strong> So, I don't think I'll be taking Tim's place in line w/ Sammy.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">oh yea..like that was ever an option.. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> <img border="0" alt="[fight]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[bullshit]" title="" src="graemlins/gr_bs.gif" />
<strong> So, I don't think I'll be taking Tim's place in line w/ Sammy.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">oh yea..like that was ever an option.. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> <img border="0" alt="[fight]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[bullshit]" title="" src="graemlins/gr_bs.gif" />
#9
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.56s installed! - and a broken tranny :(
LOL Tim. Sammy likes LT1s better anyways, so there was no way I'd get in front of you. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
#12
"The Drag Racing Director"
iTrader: (10)
Re: 4.56s installed! - and a broken tranny :(
Jason,
Sorry to hear about your tranny. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
Damn, I was hoping to run our Hot Rods side by side this weekend. <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" />
I will talk to you tomorrow at the shop. Tracy and I should be there around 1:00pm. to 2:00pm. <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />
Later,
Coach <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Sorry to hear about your tranny. <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
Damn, I was hoping to run our Hot Rods side by side this weekend. <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" />
I will talk to you tomorrow at the shop. Tracy and I should be there around 1:00pm. to 2:00pm. <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />
Later,
Coach <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
#13
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.56s installed! - and a broken tranny :(
Trevor, I have a rebuilt tranny coming from Valvegod and I'm just to rebuild this one whenever I have the cash to use as a spare.
Coach, I was looking forward to it as well. Regardless, we can still make it to the track in your car. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> It should be a blast! Give me a call this evening if you like. Email me if you need my phone numbers.
Jason
Coach, I was looking forward to it as well. Regardless, we can still make it to the track in your car. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> It should be a blast! Give me a call this evening if you like. Email me if you need my phone numbers.
Jason
#14
!Dial-up Director
Re: 4.56s installed! - and a broken tranny :(
Coach, when and were are yall going to go race? SCD friday night? I'll get some video for ya.
<small>[ May 23, 2002, 11:21 PM: Message edited by: Jsears8 ]</small>
<small>[ May 23, 2002, 11:21 PM: Message edited by: Jsears8 ]</small>
#15
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.56s installed! - and a broken tranny :(
Justin, we won't be racing until Sunday most likely. The car will not be done until late Fri/early Sat. We want to put a few more break in miles before tuning it on the dyno. Then, it will be off to the track. We might even head to Hattiesburg on Monday. We'll get the plans sorted out tomorrow though.
#16
TECH Resident
iTrader: (65)
Join Date: Nov 2001
Location: Treasure Coast Fl.
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.56s installed! - and a broken tranny :(
What RPM's would the 4.56's be turning at the end of the 1/4 ? I am thinking of going with a set with a spool in my 10 bolt <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#17
LS1Tech Co-Founder
iTrader: (38)
Re: 4.56s installed! - and a broken tranny :(
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">This way, I'll have a spare T56 for parts, etc</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Good idea. I have my freshly rebuilt spare always on standby <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Tony
Tony