Tuning by Jesse Bubb???
#1
TECH Regular
Thread Starter
Join Date: Jun 2004
Location: Bakersfield, CA
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Tuning by Jesse Bubb???
well, ive heard good things about him. But, it takes forever to get an email response from him (i actually think its his wife).
i ask basic questions but no answers. i guess that it's common for people to buy a new pcm that he has tuned, but i just simply want to send mine to him and have him tune it and send it back. i just cant get the info on how to do this.
anyone know of a better way to contact him? i asked for a phone #, but, no response....
Jeremy
i ask basic questions but no answers. i guess that it's common for people to buy a new pcm that he has tuned, but i just simply want to send mine to him and have him tune it and send it back. i just cant get the info on how to do this.
anyone know of a better way to contact him? i asked for a phone #, but, no response....
Jeremy
#6
TECH Addict
iTrader: (10)
Sorry, i get very busy-behind. I try to answer all the emails and phone calls, but also need to get the tunes out that people order. Im always about 4 days behind in shipping out everything. I personally answer 90% of the phone calls each day to answer peoples questions. Emails are usually last priority as phone calls are always top.
thanks jes
thanks jes
Trending Topics
#8
TECH Regular
Thread Starter
Join Date: Jun 2004
Location: Bakersfield, CA
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
with 17% loss, youve got about 410hp right?
or youve only got 400hp if you figure it with 15% loss through the drivetrain...
what was your ave AF ratio?
that 09 put down some impressive numbers. pushing 615-620hp!
or youve only got 400hp if you figure it with 15% loss through the drivetrain...
what was your ave AF ratio?
that 09 put down some impressive numbers. pushing 615-620hp!
Last edited by SS#1230; 04-08-2009 at 12:00 AM.
#10
TECH Regular
Thread Starter
Join Date: Jun 2004
Location: Bakersfield, CA
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
i dont see any numbers on the af graph. assuming 10:1 is the bottom line, i wouldnt want to go any leaner than where your at now. looks like you get down into the 12s and mid-high 11s after 6000rpm, but i would not consider that rich by any means.....
#12
TECH Regular
Thread Starter
Join Date: Jun 2004
Location: Bakersfield, CA
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
yeah, that af ratio looks fine. gets a little rich (about stock af) after 6500, but i wouldnt mess with it myself because i dont ever rev past that. rarely past 6000.
#13
After I talked with Jesse and my mechanics @ QMS, both agree AF seems too rich.
I have emailed Jesse the charts and now I await for his response after Jesse looks at the charts....
I have emailed Jesse the charts and now I await for his response after Jesse looks at the charts....
#15
TECH Regular
Thread Starter
Join Date: Jun 2004
Location: Bakersfield, CA
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
lemme know what he says. i wouldn't want to go any leaner than 13:1. i may just be a puss though...
so i dont think id have him mess with anything below 5700rpm. you may get a little more power from 5700 on up.
BacDoc, you will definitely pick up some ponies after you get leaned out a bit.
so i dont think id have him mess with anything below 5700rpm. you may get a little more power from 5700 on up.
BacDoc, you will definitely pick up some ponies after you get leaned out a bit.