V-Power hood 09+ is ready to go!
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So, I swung by the shop really quick this morning to test fit the hood. He's ready to prime and shoot at this point since it fit perfectly. He was extremely impressed with the direct bolt on and the seams as you can see from overhead pics below. It's not all the way closed in the front as he didn't want to latch the hood down without the front bumper off to make sure all was good. (Apparently, he had some issues with an aftermarket hood one time when they closed it and he had a lot of trouble getting it open again lol.) So, here are the pics bolted up and sitting down to the point the lever was over the hoop for the catch part. I'll be about a week behind my anticipated schedule when it's all said and done but hopefully it will be painted and on by next Wed. Some of the pics make the hood look dirty lol because of the iPhone HDR feature but I tried to use the best pic of HDR vs non to capture the lines of it and since it's white(ish) some of the pics washed it out when the flash hit so I had to use the HDR ones.
Enjoy
![](http://i10.photobucket.com/albums/a105/bherndon2/27cbc435.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/8faac2ea.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/0457617b.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/a5dbab54.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/7984dcde.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/75033291.jpg)
Enjoy
![](http://i10.photobucket.com/albums/a105/bherndon2/27cbc435.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/8faac2ea.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/0457617b.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/a5dbab54.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/7984dcde.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/75033291.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/dc54b448.jpg)
#3
TECH Enthusiast
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd like to see it painted, but can imagine it'll look pretty cool!
Looks like there may be enough room at the cowl to install a fuel pressure and/or boost gauge(s) there (hidden except to driver), although visibility may not allow (hard to tell with the pics); if you want electrical gauges vs. mechanical, sure an LED readout would open up even more possibilties instead of trying to read a small needle as you're going...that would be nice.
Looks like there may be enough room at the cowl to install a fuel pressure and/or boost gauge(s) there (hidden except to driver), although visibility may not allow (hard to tell with the pics); if you want electrical gauges vs. mechanical, sure an LED readout would open up even more possibilties instead of trying to read a small needle as you're going...that would be nice.
Trending Topics
#17
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here are some more shots up at Devou Park Golf Course behind my house
![](http://i10.photobucket.com/albums/a105/bherndon2/6dcf11d1.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/2e65461f.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/819b9d13.jpg)
See that nice big cowl induction vent under the bulge? Car running, you can feel the heat pushing out of it. I still need to put my ww nozzles in, couldn't wait any longer... wanted it for the wknd
![](http://i10.photobucket.com/albums/a105/bherndon2/2fb15a30.jpg)
Close up on vents, color matched to show subtly, going flat black to match grills soon.
![](http://i10.photobucket.com/albums/a105/bherndon2/e602c83f.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/ad5265ba.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/f7e8e6fa.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/747aaddb.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/918450e5.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/7e70db27.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/6dcf11d1.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/2e65461f.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/819b9d13.jpg)
See that nice big cowl induction vent under the bulge? Car running, you can feel the heat pushing out of it. I still need to put my ww nozzles in, couldn't wait any longer... wanted it for the wknd
![](http://i10.photobucket.com/albums/a105/bherndon2/2fb15a30.jpg)
Close up on vents, color matched to show subtly, going flat black to match grills soon.
![](http://i10.photobucket.com/albums/a105/bherndon2/e602c83f.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/ad5265ba.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/f7e8e6fa.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/747aaddb.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/918450e5.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/7e70db27.jpg)
![](http://i10.photobucket.com/albums/a105/bherndon2/d09ac798.jpg)