Cadillac CTS-V 2004-2007 (Gen I) The Caddy with an Attitude...

Dyno Results

Thread Tools
 
Search this Thread
 
Old 05-04-2006 | 06:34 PM
  #1  
SilveradoSS500's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2005
Posts: 1,698
Likes: 0
From: DFW
Default Dyno Results

sorry i have a bad camera, i will upload the hole graph, The torque curve is nice, it starts at 340+ at 3000rpm. I am happy with the cars performance with a small cam. 376torque & 384hp.
Attached Thumbnails Dyno Results-dyno.jpg  
Old 05-04-2006 | 07:24 PM
  #2  
2c5s's Avatar
10 Second Club
iTrader: (11)
 
Joined: Sep 2003
Posts: 1,676
Likes: 0
From: Murrieta Ca.
Default

What are all the mods on the car?
Old 05-04-2006 | 07:28 PM
  #3  
SilveradoSS500's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2005
Posts: 1,698
Likes: 0
From: DFW
Default

the engine mods are: small cam 219/225/561 114lsa, kooks, hp software. bolt ons.
Old 05-04-2006 | 08:03 PM
  #4  
Chris Jones's Avatar
On The Tree
 
Joined: Jan 2002
Posts: 119
Likes: 0
From: Atlanta
Default

How's the idle on that cam?
Old 05-04-2006 | 08:05 PM
  #5  
2c5s's Avatar
10 Second Club
iTrader: (11)
 
Joined: Sep 2003
Posts: 1,676
Likes: 0
From: Murrieta Ca.
Default

Originally Posted by SilveradoSS500
the engine mods are: small cam 219/225/561 114lsa, kooks, hp software. bolt ons.

What bolt on's?
Old 05-04-2006 | 08:38 PM
  #6  
SilveradoSS500's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2005
Posts: 1,698
Likes: 0
From: DFW
Default

INtake, Magnaflow mufflers, ported tb, pushrods, ti retainers, 918 springs. hp tuner. It idles nice, 875rpm. I just got done racing around and it pulls pretty hard.
Old 05-04-2006 | 09:17 PM
  #7  
rpctsv64's Avatar
Banned
 
Joined: Mar 2006
Posts: 65
Likes: 0
Default

Nice numbers,you could have done your pulls on a stingy dyno too.My car with a maggie and exhaust with a box tune did 389rwhp on a stingy dyno.It's not uncommon to see dyno's vary 25hp.
Old 05-04-2006 | 10:55 PM
  #8  
2c5s's Avatar
10 Second Club
iTrader: (11)
 
Joined: Sep 2003
Posts: 1,676
Likes: 0
From: Murrieta Ca.
Default

Originally Posted by rpctsv64
Nice numbers,you could have done your pulls on a stingy dyno too.My car with a maggie and exhaust with a box tune did 389rwhp on a stingy dyno.It's not uncommon to see dyno's vary 25hp.

390 rwhp with a box tune seems about right.
Old 05-05-2006 | 12:06 AM
  #9  
obZidian's Avatar
TECH Addict

iTrader: (2)
 
Joined: Oct 2004
Posts: 2,890
Likes: 0
From: Miami, Fl.
Default

not bad.... expected with those mods.... i figured a bit less actually so im a bit surprised....

should be tons of fun on the street?!

and vids, we need some for this section

OH, where were you peaks at and how much did it trail of and at what rpm? Also, And im not trying to get at you but that cam is quite deceptive. I wouldn't call it "small" but more along the lines of mild. Maybe this is just me over analysing it and i DO know there are cams up and beyond the 270/280 range but thats ALMOST like a 224 cam...

hmmm... still a nice increase in power... with a nice port velocity head job, or aftermarket heads.... you should be well over the 400rwhp mark...

Now your in trouble becuz the mods only get more expensive and you wont know how to stop yourself!!!

congrates!!
Old 05-05-2006 | 08:25 AM
  #10  
Parker TX's Avatar
TECH Addict

iTrader: (16)
 
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
Default

Where did you end up dynoing the car?
Old 05-05-2006 | 10:41 AM
  #11  
SilveradoSS500's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2005
Posts: 1,698
Likes: 0
From: DFW
Default

Velocity or Matchless performance. Whatever you want to call it.
Old 05-05-2006 | 11:12 AM
  #12  
Parker TX's Avatar
TECH Addict

iTrader: (16)
 
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
Default

Where is Velocity located, over around Addison right.
Old 05-05-2006 | 02:27 PM
  #13  
SilveradoSS500's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2005
Posts: 1,698
Likes: 0
From: DFW
Default

Ya, its a skyline and midway. I am going to dyno it again at 21st just to see a the difference! I want to check out your car, you should meet me up there in a couple of days...
Old 05-05-2006 | 02:41 PM
  #14  
Parker TX's Avatar
TECH Addict

iTrader: (16)
 
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
Default

UHHH...I don't have my **** back yet!
Old 05-05-2006 | 02:52 PM
  #15  
OrangeFRC's Avatar
Staging Lane
 
Joined: Mar 2004
Posts: 59
Likes: 0
From: Allen, TX
Default

Originally Posted by Parker TX
UHHH...I don't have my **** back yet!
how long has it been now ? I remember someone saying it was going to back on the road in Feb. at the absolute latest ????????

I think you need to make some phone calls
Old 05-05-2006 | 03:00 PM
  #16  
Parker TX's Avatar
TECH Addict

iTrader: (16)
 
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
Default

I make phone calls all the time...
Old 05-05-2006 | 03:24 PM
  #17  
SilveradoSS500's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2005
Posts: 1,698
Likes: 0
From: DFW
Default

that sucks. You have more than one car, right!
Old 05-09-2006 | 08:37 AM
  #18  
2c5s's Avatar
10 Second Club
iTrader: (11)
 
Joined: Sep 2003
Posts: 1,676
Likes: 0
From: Murrieta Ca.
Default

Originally Posted by SilveradoSS500
that sucks. You have more than one car, right!

How about posting the dyno graph and cam card. How much advance is in the cam?
Old 05-09-2006 | 08:09 PM
  #19  
rpctsv64's Avatar
Banned
 
Joined: Mar 2006
Posts: 65
Likes: 0
Default

I did my pulls at 21st.I was told that was a stingy dyno.I really want to get down there to do more pulls.Who's the best tuner in dallas?My mods are about the same as Gordys except I have headers and rt cats.I'm curious to see my gains to see if I need a better tune.New heads and cam are not being ruled out either.
Old 05-09-2006 | 08:40 PM
  #20  
Parker TX's Avatar
TECH Addict

iTrader: (16)
 
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
Default

Curious, but do you dyno higher than Gordy with the headers and rt cats?


Quick Reply: Dyno Results



All times are GMT -5. The time now is 07:43 PM.