richard david

What HP gains to expect going to a 402 while still using my eps 234_246 cam and 243get heads. Also plan to have heads ported. I just wanted a 10.99 pass, finally got it now I want more.

ZONES89RS

iTrader: (25)

Might be a bit It over 550 with that cam, remember, cubic inches eat up duration, so something along 248/ 256 duration is what you will need to give that engine the air it needs to make 600. Maybe larger, so custom grind is calling your name.

JMoore17

i keep hearing this "custom grind" cam, how do you know what to "grind" it to? if you get me anywhere near a cam it'll be worth the metal its made out of... so how would you get the perfect cam selection for what your building?

bww3588

iTrader: (49)

Contact PatG, or EPS. they will custom spec you a cam for a fee. you will fill out a sheet with all required information and they will send you cam specs.

3pedals

iTrader: (3)

there are many other professionals as well, who can spec a cam that is suited to your combo. I used Bret Bauer.

speedtigger

iTrader: (16)

AMEN. Like the company who makes the cam.

richard david

I talked to the people at comp cams before I talked to geoff and made the mistake and said street car. They wanted me to stay in the low 220s and make it on a114. I'm glad I made that call to EPS.

3pedals

iTrader: (3)

Comp will always spec on the EXTREME conservative side.

Prorac1

iTrader: (4)

I have found that the best way to pick a cam is to find someone who is doing what you are doing, and duplicate the set up. Its hard to argue with results. And I guess there is something to be said for being a pioneer, but ill personally leave that for people with more time and money than me, lol. Eric L

GC99TA

iTrader: (30)

I'm waiting to see 3pedals' track results with his new cam so I can copy him....LOL. That's one nasty little 6.0L .

3pedals

iTrader: (3)

Lol, I'm pretty anxious to get it on the track too!

Prorac1

iTrader: (4)

Git it done pedals, lol. Lazy minds want to know, lol. Eric L