stang_kllr

iTrader: (6)

Well im getting closer to start up day. I need to plumb in my map sensor and fuel system. I just need to find out where I will mount my pump and regulator. anywho, here are some pictures. I just finished painting the intake, this week it will get sent out to have a fogger installed, and possible a puck as well

windmill

iTrader: (4)

Looks good,,, what heads you have,,, the ports look huge,

stang_kllr

iTrader: (6)

thanx man. they are 243s. AI 232 port job, and milled

stang_kllr

iTrader: (6)

just a few more updates with pictures.

Made a Map sensor bracket

stang_kllr

iTrader: (6)

Sent my intake off to Nitrous Outlet for some foggers

stang_kllr

iTrader: (6)

stang_kllr

iTrader: (6)

Also getting the B&M mounted.

silverls1z28ofdeath

Looking good. The one thing I'd recommend is to cut underneath the cowl further back that way you have room to change secondaries with out having to take off the whole carb. But all in all looks clean.

Pop N Wood

iTrader: (1)

Sinister looking stuff

dmracing

iTrader: (81)

Looking good

stang_kllr

iTrader: (6)

Thanx man. Yea actually I had to do a lot more cutting to clear the solenoids. I cut back deeper and wider. Im also putting on a Gemini plate with front and back mounted noids next week so ill probable have to take off the carb to change secondaries anyway. But I guess well find out when I get it on there.
Thanx guys! Hopefully the car will run as good as its looking.