cheap 10sec street car?
#1
cheap 10sec street car?
hey guys a couple of months ago i had to get rid of my 94 trans am with a 383 in it due to money issues but now i have a new job and i miss my f-body im looking into a 98-02 camaro.
when i had my trans am it ran mid to high 11s after i dumped about 6grand into it but it was also street legal. I want to run 10s with as little money as possible while keeping it close to street legal since my state just did away with inspections.
I was thinking of stripping the car of all unneeded wieght (rear seats, replace the hood with a fiberglass hood etc.) long tube headers and custom x pipe, 3.73 or 4.11 gears and nitrous between 125 and 150 depending on how many miles are on the motor and how good it runs. I am going to put a roll cage in after i see what im running.
I know there is alot more i can do to the car but i want to keep it as cheap as possible but if i dont hit 10s with that i can always add more.
let me know what you guys think.
when i had my trans am it ran mid to high 11s after i dumped about 6grand into it but it was also street legal. I want to run 10s with as little money as possible while keeping it close to street legal since my state just did away with inspections.
I was thinking of stripping the car of all unneeded wieght (rear seats, replace the hood with a fiberglass hood etc.) long tube headers and custom x pipe, 3.73 or 4.11 gears and nitrous between 125 and 150 depending on how many miles are on the motor and how good it runs. I am going to put a roll cage in after i see what im running.
I know there is alot more i can do to the car but i want to keep it as cheap as possible but if i dont hit 10s with that i can always add more.
let me know what you guys think.
#4
Trending Topics
#11
#13
unless you live in high altitude, shouldnt be that hard. I've had a few 10sec DDs
i've done it cheap before, but broke a few built 4l60s in the process.
cheap regrind cam
2800 stall
255DR
150 wet shot
longtubes/borla
no weight reduction
only vids I have of that car, not 10s but 11.0s that night
http://www.youtube.com/watch?v=OC-2sO2hHx4
i've done it cheap before, but broke a few built 4l60s in the process.
cheap regrind cam
2800 stall
255DR
150 wet shot
longtubes/borla
no weight reduction
only vids I have of that car, not 10s but 11.0s that night
http://www.youtube.com/watch?v=OC-2sO2hHx4