When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had a couple of minor fuel leaks and it was leaking oil around the filter some and needed to be tightend but other than that everything is going well. I'm not able to put the car into reverse until the transbrake is connected so I can do the initial break-in procedure on the rear end. Will be working on getting the IAC counts into their proper range so I don't have to sit in the car to hold idle.
I can now get the transbrake and the line lock wired up and do the initial break-in procedure on the MWC Fab 9. I'm so ready to sit this thing down on all fours and go pound on some pavement. Future plans for the car is to install a cage and a Kirkey racing seat while working on the body and finally paint. Never done paint and body but will purchase a paint gun and some Eastwood paint and just see how it goes.
My dad was raised in Mobile Alabama..... our big thing is oysters haha him and his brother usually go through their and along the pan handle and then come back with several buschles and we just all huddle around the cooler and shuck haha. Cant have fresh seafood without cold beer my friend.