ryeguy2006a

iTrader: (27)

Looks like after a little digging, they are actually on Hooker's website. I wonder what cars they are designed around? Maybe they will fit with the 1st gen mounts I have?

https://www.holley.com/products/ls_p.../parts/8510HKR

Any thoughts? Did anyone see them at SEMA, or any other shows?

showdog75

iTrader: (8)

I seen the 3d printed version at the LS Fest. Looks very promising.

Project GatTagO

iTrader: (7)

The word is that these will fit every vehicle for which Holley currently has a swap kit available.

Andrew

ryeguy2006a

iTrader: (27)

Thought I would copy a PM I received earlier. Looks like a no go on the 1st gens...

Project GatTagO

iTrader: (7)

Just use a shorty header on the drivers side and the turbo log on the passenger side.

Andrew

truckdoug

iTrader: (25)

i wonder if they'll sell just the passenger/turbo side? i dont want that other stuff.

alocker

iTrader: (10)

Yep, too bad you can't just buy the one side.

Hopefully they will.

Toddoky

I will pass along all your comments to those above me who can act on them.

M_Minnick

iTrader: (1)

I have a rack and pinion on my 1st-Gen, so I imagine the manifold will fit just fine. Is there an ETA on these, Todd? I really wasn't expecting them until the spring, but seeing as I just ordered a billet S485 and a cam from LJMS yesterday, sooner would be better.

Mike

Toddoky

Hello Mike. I don't know what the target release date is as I'm not directly involved with this particular project. Seeing how the manifold set is up on the website, I would say January would be a good estimate.

6D9 Matt

Subscribed! Was hoping to go turbo before spring, so this will be a consideration.

LS1 pwrd NOVA

iTrader: (2)

I wonder what it's going to cost

Toddoky

$499 for the pair of manifolds from what I've heard. We will also be prototyping application-specific crossover pipes to connect the manifolds that will be available separately.

Dimeomboost

I did this on my s10 regular header with a v band welded on crossing over to a log manifold I have works great and anyone that knows s10s knows the steering shafts is the biggest hold back of all and I clear with an inch to spare

mOtOrHeAd MiKe

iTrader: (8)

Sounds like a fair price. Definitely on my radar as an option.

Stonerracing

Any new updates on these. I was wondering if they'll fit my 5.3 in 85 cutlass.

Toddoky

If you are using the Hooker G-body engine mounting brackets they will. Otherwise, I can't say.

1936 LS1

iTrader: (10)

Anyone heard a release date yet?

M_Minnick

iTrader: (1)

I called last week and they said 2 more months. It looks like I'm just going to have my fab guy build me a log manifold.

Project GatTagO

iTrader: (7)

I was just looking at the instruction sheet for these and it looks like Holley will be selling them separately and also offering crossover pipes for various transmissions. The instruction sheet also has detailed dimensions and I am sad these will not fit my 67 Cougar...but should fit nicely on my 70 GTO...

Andrew