What fuel rail with Vette filter/regulator
Thread Starter
Launching!
Joined: Oct 2007
Posts: 288
Likes: 0
What fuel rail with Vette filter/regulator Hey guys, I was wondering if the fuel rail off my 05 LQ4 would work with the corvette fuel filter/regulator? Im pretty sure I still need to get a return style but I am just curious. BTW I will be using the truck intake as well. Let me know, thanks.
Sam
Sam
since the vette filter/regulator has a line coming out of it for the return, if you keep a fuel rail that has a return on it, you are basically going to spill fuel all over the place, so either get a regular filter assembly, or get a 99 up vette single inlet fuel rail.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
The reason for the return line is so the pump flows enough fuel volume per minute to supply the engine and cool the pump with the excess fuel flow. So, use the '99 Vette filter/regulator: 3/8 fitting on inlet is supply from pump; 5/16 fitting on inlet side is return to tank and single 3/8 fitting on outlet side goes to the one-line fuel rail. The filter/regulator must have been made for swaps ....
Joined: Nov 2001
Posts: 1,707
Likes: 33
From: Anderson, Indiana
The GM number is 10299146. That's the 99 and newer Corvette filter/regulator. This should work great for your application.
You could go with an expensive Aeromotive regulator, but by the time you buy all of the needed fittings, you'll have 3-4 times as much money in it!
You could go with an expensive Aeromotive regulator, but by the time you buy all of the needed fittings, you'll have 3-4 times as much money in it!
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
