My 67 camar0 LS1/4l60 swap thread
#381
they keep me goin too
#385
#387
hey man, any pics of how you mounted the radiator? I'm using the same one but want some mounting ideas. I don't have my radiator yet but getting it soon. Also, what 95 jeep? wrangler? cherokee? no part numbers by chance? thanks!!
#388
Hello, do you by chance know the radiator hose part #'s you had used? I'm at that point with my camaro. My car was a column shift originally too but I wasn't brave enough to try it! Thanks
#389
What I'd really love to know is how he got it here.
Tell him to visit merkursport.com if he hasn't already. We love cosworth sierras!
my sierra-esqe XR4Ti
#390
10 Second Club
iTrader: (8)
What an epic success story. Thanks for sharing your build process.
I'm looking at doing a 6.0L/4L60 swap into a 67 Firebird. The parts list should be quite similar.
I'm gonna use an electric speedo.
I like your exhaust set up. Simple and effective.
Not sure on steering rack. Currently it's manual. I'll probably do a 3rd gen like you. Seems the best option.
Disc brakes are a must as well.
Question about your mounts. Engine and trans. You mention two things.
1) you would have used a different trans cross member. Any particular reason?
2) the engine mounts have the back really close to the firewall. If you were to do it over, how would you address this? Or is it not a big deal?
Thanks!
I'm looking at doing a 6.0L/4L60 swap into a 67 Firebird. The parts list should be quite similar.
I'm gonna use an electric speedo.
I like your exhaust set up. Simple and effective.
Not sure on steering rack. Currently it's manual. I'll probably do a 3rd gen like you. Seems the best option.
Disc brakes are a must as well.
Question about your mounts. Engine and trans. You mention two things.
1) you would have used a different trans cross member. Any particular reason?
2) the engine mounts have the back really close to the firewall. If you were to do it over, how would you address this? Or is it not a big deal?
Thanks!
#391
I ended up using stock 2002 camaro hoses now, upper and lower, amazingly they fit and look cleaner than the jeep/gmc van i had been using!
#392
What an epic success story. Thanks for sharing your build process.
I'm looking at doing a 6.0L/4L60 swap into a 67 Firebird. The parts list should be quite similar.
I'm gonna use an electric speedo.
I like your exhaust set up. Simple and effective.
Not sure on steering rack. Currently it's manual. I'll probably do a 3rd gen like you. Seems the best option.
Disc brakes are a must as well.
Question about your mounts. Engine and trans. You mention two things.
1) you would have used a different trans cross member. Any particular reason?
2) the engine mounts have the back really close to the firewall. If you were to do it over, how would you address this? Or is it not a big deal?
Thanks!
I'm looking at doing a 6.0L/4L60 swap into a 67 Firebird. The parts list should be quite similar.
I'm gonna use an electric speedo.
I like your exhaust set up. Simple and effective.
Not sure on steering rack. Currently it's manual. I'll probably do a 3rd gen like you. Seems the best option.
Disc brakes are a must as well.
Question about your mounts. Engine and trans. You mention two things.
1) you would have used a different trans cross member. Any particular reason?
2) the engine mounts have the back really close to the firewall. If you were to do it over, how would you address this? Or is it not a big deal?
Thanks!
The trans crossmember from S&P bolts to the vertical face of the subframe, it just seems to me it would be better to bolt through the top, like the origional one did, that being said, it seems to be holding up fine.
#393
very cool, I am sure he is on the forum already, he has has several xr4ti's... Love yours in black. He is very mild with about 300RWHP... he has a new turbo for it, but who knows if he will ever get around to installing it, He just picked up a porshe 928, so thats his new intrest at the moment.
#394
Figured out why my belt kept walking off.. my "stock" maggie tensioner was effed up... dont know how..
New HD one is installed, no more belt issues, back to full boost!
New HD one is installed, no more belt issues, back to full boost!
#397
getting put away for winter soon. I plan on doing some more front suspension upgrades, valve seals/ springs, aem wideband and maybe roller rockers...just because. its not winter yet and I already can't wait till spring.
#400