silverz28camaro

iTrader: (20)

Another before/after of the steel aluminum unit, IMO the aluminum looks alot nicer ans is up to the task of a beating I gave it after the install

silverz28camaro

iTrader: (20)

silverz28camaro

iTrader: (20)

97camaroguy

iTrader: (5)

'murica!

silverz28camaro

iTrader: (20)

silverz28camaro

iTrader: (20)

Found this truck on youtube

Tipnitty

iTrader: (3)

Alright, I found the thread man. Was nice to meet you yesterday and see the cars man.

silverz28camaro

iTrader: (20)

Its been over 6 years since the 4wd has been operational, time to get it going and see what it does

I got this bone yard axle from a buddy, its the same axle and I thought it would be worth buying since I daily my truck and this would let me slowly build it up

silverz28camaro

iTrader: (20)

I decided to weld all the areas that act as sleeves and from the axle to the differential housing. set up some matching 3.90s , and gave it an epoxy paint job

silverz28camaro

iTrader: (20)

silverz28camaro

iTrader: (20)

Stayed late at work and swapped out the old and in with the new

silverz28camaro

iTrader: (20)

I did my axle, and my co-workers worked on their projects as well, GTO was getting ported 5.3 heads and tv2 cam, and the 99 cobra was getting new big nitrous solenoids and purge/stand alone fuel cell.. we were all up til 230 am last sat night getting these cars/truck finished up

silverz28camaro

iTrader: (20)

silverz28camaro

iTrader: (20)

Sadly enough still no 4WD I need a special 7290 to 1330(bigger yoke on axle) u-joint that I just ordered tonight, should be here next week and then it should have 4wd...finally

silverz28camaro

iTrader: (20)

The dodge style strap yoke is weak, I broke a few with the 318 on 4wd launched, I found a 1330 yoke with the much bigger U-bolts and thats why I need the conversion joint

Checkmate

iTrader: (2)

Looks good. Will you have add or change any wiring to make 4wd operational

silverz28camaro

iTrader: (20)

No additional wiring required, the transfer case is engaged by a switch

Checkmate

iTrader: (2)

What are you going to do for a vss from the transfer case to keep the PCM happy when in 4wd

silverz28camaro

iTrader: (20)

When I', in 4hi the computer is fine, I can shift to 4 lo and that throws off my shift points...I really don't need 4 low, but even if I did use it I can manually shift it 1st 2nd, anything faster then that and I may as well be in 4 hi...but just in case I need to pull a stump out...4lo + 3600 stall is mean

Checkmate

iTrader: (2)

I thought about it more after I made the post and realized you didn't need to do anything.
The 360 blew up in my ramcharger so looks like I need to get the rest of my **** together and make this swap happen.