zipster

iTrader: (5)

I searched, here, on the internet, and asked around, does anyone have this pan kit/H3 pan in a fox Mustang? Pictures?

zipster

iTrader: (5)

Come on, almost 30 people read this and no comments?

dville_gt

iTrader: (5)

It is only marginally shorter then the truck pan, too deep for comfort.

I went with the CTS-V pan, with the AJE k-member it fits beautifully. I got the pan, the pickup tube, the dipstick, and the dipstick tube for $205.55 from partstaxi.com, all brand new OEM GM parts. The windage tray from the truck motors is the same as the CTS so that is not needed.


12631828 - CTS-V Pan, Gasket, and bolts

12621299 - CTS-V Pickup tube/screen

12584738 - CTS-V Dipstick Tube

12584737 - CTS-V Dipstick

EspaceF1Fan

Got pics of that?

johnyrrr

iTrader: (2)

Thanks for the part numbers and website hook up, VERY useful.

johnyrrr

iTrader: (2)

I just paid $221.00 for the exact same parts from there, thanks again though for the correct paret numbers.




I went with the CTS-V pan, with the AJE k-member it fits beautifully. I got the pan, the pickup tube, the dipstick, and the dipstick tube for $205.55 from partstaxi.com, all brand new OEM GM parts. The windage tray from the truck motors is the same as the CTS so that is not needed.


12631828 - CTS-V Pan, Gasket, and bolts

12621299 - CTS-V Pickup tube/screen

12584738 - CTS-V Dipstick Tube

12584737 - CTS-V Dipstick[/QUOTE]

Jimbo1367

I've had good luck with Partstaxi too. At least its ALOT cheaper the the F-body setup. .

LS Desert Ranger

i just went on partstaxi right now to find that oil pan but i dont think they supply it anymore.

dmracing

iTrader: (80)

I just ordered mine!

johnyrrr

iTrader: (2)

I hope you get all of your pan bolts, mine was missing a few and whan I called I got nothing. They shipped the pan in a big box with no packing and just through the pan bolts and everything in the box loose. Needless to say the box was tore up and open at one corner and missing bolts, Thier shipping methods leave much to be desired Lucky thier prices are good

ebk06

iTrader: (5)

Those pans sit pretty low. hopefully you dont lower the car too much or go over speed bumps lol.

TeamZmotorsports

can someone post a picture of this pan?

windmill

iTrader: (4)

pan diff here
https://ls1tech.com/forums/conversio...-oil-pans.html

jvert

iTrader: (1)

Thanks for the link. Great prices. I plan to give a call for my cts v oil pan.

dmracing

iTrader: (80)

Capown

iTrader: (5)

AJE K-member with AJE mounts and cts V pan maybe 3/4" hang down, thats with no transmission though so it may not hang down that low.

TxFireman1972

iTrader: (8)

Is this the CTS-V pan?

dmracing

iTrader: (80)

Yes, it is. Brp mounts on stock k member
Headers are Brp 1 7/8 to 2 inch step header also, kit fits great