Stans 1968 camaro LS swap and other upgrades!
#381
pulled my computer today and took it to jesse bubb from wait4me performance,he live like 2hours from me.what a huge difference the tune made.he found a ton of stuff wrong in the tune speed and performance did.it was bad enough they didnt turn of vats but the whole tune was fu#ked up!!jesse charged me $75.00 for the tune,cant beat that!i walked into his house and he must of had 100 car computers stacked up by his work area.i will prob take the car back to him for a full dyno tune,he charges like $275 for a dyno tune..any way check out the new video!!!all probs from before fixed with new tune!!
http://youtu.be/Ws62ED5euHc?hd=1
http://youtu.be/Ws62ED5euHc?hd=1
#384
Yeah start up is fixed, not sure about it being lean,when I was there getting it programed he changed alot of parameters!I dont exactly know what he changed but I know timing was way way off!!I need to work on getting exhaust on next few days so I can take it out for a good drive and really test it!!driving around the neighborhood really isn't enough of a test!I Also need to look into that mil code and if that lamp I used from radio shack will work!
#385
On The Tree
iTrader: (82)
Join Date: Jan 2011
Location: SD
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
That thing sounds awesome!! Its kinda disturbing to know street and performance screwed up the tune so bad, especially when you dish out the kinda cash they ask for everything... Get that exhaust on and lets see a video of it going down the road!!!!
#386
Look at the latest pic's of my car, thats the stock 327 springs (non A/C) with 1 coil cut, stance is perfect on 17's in my opinion, bet it would look just as good with the 18's.. what is your front tire size?
#391
#392
I haven't really had it Out to check yet,got the car up on jack stands and putting the x pipe up and the old flowmasters back up!need to pull the x pipe back off now that I got it clamped so I can have it welded!!I bought two sets of these to put between the x pipe and headers and between x pipe and mufflers!wanted to be able to pull apart if needed!!!
http://www.jegs.com/webapp/wcs/store...owmaster+15938
I got this x pipe!
http://www.jegs.com/p/JEGS/JEGS-Univ...55652/10002/-1
http://www.jegs.com/webapp/wcs/store...owmaster+15938
I got this x pipe!
http://www.jegs.com/p/JEGS/JEGS-Univ...55652/10002/-1
#395
The car is running great,got my exhaust on the car!need to take it some where to get welded up!I have developed one problem though,I have antifreeze leaking where the hoses mount to the firewall behind that cover!thank god it not leaking in the car!I assume it's heater core!
#396
TECH Addict
iTrader: (3)
The car is running great,got my exhaust on the car!need to take it some where to get welded up!I have developed one problem though,I have antifreeze leaking where the hoses mount to the firewall behind that cover!thank god it not leaking in the car!I assume it's heater core!
#397
TECH Fanatic
iTrader: (23)
This is why I have bad mouthed Street and Performance swap parts, its all just basic street rodder garbage, and most people that buy there stuff end up being very unhappy!!
I have talk with Jesse about doing a mail order tune, but if I ever get mine running it will go straight to Mike Norris for dynotune,
I have talk with Jesse about doing a mail order tune, but if I ever get mine running it will go straight to Mike Norris for dynotune,
#399
Steve,I hear your point!they are not cheap but there parts all work good together!I like my wiring harness alot! Just would never trust them to program the comPuter ever again!!!