In the planning stages of an LS conversion into a 90's mustang coupe. I'd like to go with an LS2/3 and auto transmission. Most conversions I've found searching are using a 6 speed manual transmission. Which auto transmission will work/fit?

Thanks

 

I am using my PA supercomp c4. Jw bell tci flexplate and Ucc converter with stock chevy height and a c4 pump.

I did it for the lifetime warranty

Tim

 

How much power you plan on making, and how often you plan on driving the car?

TH350 would probably work..or a TH400/4L80E to handle alot of power.

 

I have a Th400 that I'll be installing within the next month. AJE makes a trans mount for PG's, Th350 and Th400 for a fox.

People have also installed 4l60's as well but I have yet to see a 4l80

 

I've seen a 4l80 in a fox. I'll get on a local site and post pics when I get home.

 

Thanks for the responses guys. I definitely want an od transmission. I want the car to be able to cruise anywhere like OEM and get good gas mileage. Probably start the car off around 400 rwhp N/A, and knowing me, add a turbo or blower later (600+rwhp)

 

I put a 6l80e in a fox platform and it fit. Have not got it running yet but it bolted right in.

 

I have a 4l60e in my 88 lx fox making just under 600rwhp. Fits great. Soon i'll be swapping in a 4l80e to hold the power and be more reliable. I know 4l80e s fit just fine.

 

The 80 fits, it is tight.

 

if any of you fox swap guys want some 93 cobra rear disk im selling mine. its the kit from north race cars. less then 5k miles on them. im just going 5 lug

 

Merry Christmas..I would like to do the same 6l80 in y 04 stang. What crossmember did u use snd did u have to cut anywhere.

 

They guy you responded to posted that 6-1/2 years ago. He MIGHT still be around...

 

He was last active in Nov. of this year

 

Did you get it to work? Any pics of the trans in the tunnel? What crossmember did you use?
Thinking of going 6l80e as well, any input would be great.

 

tippy hasn't been here for 2-1/2 years