"SSAWD" Project Camaro
#61
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Got the polished water pump and alt on and the Procharger brackets
Be Cool polished radiator and spal fans.
carbon fiber glove box door with the quick latch mini installed, and the
ground effects are installed here is the first side profile shot for you.
more soon.
Be Cool polished radiator and spal fans.
carbon fiber glove box door with the quick latch mini installed, and the
ground effects are installed here is the first side profile shot for you.
more soon.
#62
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
ran brake lines today, started running wire harness for the Holley and the gauges.
prepped the carbon fiber wing and test fit. had few issues with the front drive shaft
clearing the oil sending unit. very tight fit but I finally got it. thxnx for positive feed back I did not know how everyone would except it had a lot of hater and people telling me we could never make it work I have heard that 1,000 times. So that being said I am so happy to finally start seeing the light at the end of the tunnel. more soon.
prepped the carbon fiber wing and test fit. had few issues with the front drive shaft
clearing the oil sending unit. very tight fit but I finally got it. thxnx for positive feed back I did not know how everyone would except it had a lot of hater and people telling me we could never make it work I have heard that 1,000 times. So that being said I am so happy to finally start seeing the light at the end of the tunnel. more soon.
#63
TECH Addict
iTrader: (2)
thxnx for positive feed back I did not know how everyone would except it had a lot of hater and people telling me we could never make it work I have heard that 1,000 times. So that being said I am so happy to finally start seeing the light at the end of the tunnel. more soon.
#65
looks good! perfect union between the two different generations
#68
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
the paint work is finished up got it cleared today. buffing and final assembly are up next. 2 weeks to finish it up for sema.
Got a lot of stuff to finish up but starting to look like a car at least.
Got a lot of stuff to finish up but starting to look like a car at least.
#71
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Forgeline wheels came in and got mounted to my Toy tires today
mounted the master and ran brake lines.
installed the machined washer to the shock towers
Mounted the speedster humps
Finished buffing out the paint job.
You can see he tricoat flip flop pearl on the black stripe.
mounted the master and ran brake lines.
installed the machined washer to the shock towers
Mounted the speedster humps
Finished buffing out the paint job.
You can see he tricoat flip flop pearl on the black stripe.
#73
I find the people with the most negative feedback for me or lack of credit where credit is due are the ones who are just jealous that you thought of it first or have the skills to do it and they don't.
Personally, I have found that the best fabricators/craftsman know good work when they see it and are self confident enough in their own skills to compliment another person's skills.
#74
TECH Fanatic
iTrader: (3)
Join Date: Jan 2008
Location: Corpus Christi Texas
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
Just found this and the drawing had me thinking this was not going to turn out to my liking but the result thus far is much nicer than expected. The lines flow well together. GL at Sema
#75
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
The windshield it installed and the carbonfiber cover panel on it.
mirrors are test fit.
rear facia and defussor panel installed as are the tail lights.
rear lights are wired up, trunk lid and wing installed..
Finally got the rest of my parts for the 4 link rear end so hope to have that in today.
making up p/s line today and working on wiring.
mirrors are test fit.
rear facia and defussor panel installed as are the tail lights.
rear lights are wired up, trunk lid and wing installed..
Finally got the rest of my parts for the 4 link rear end so hope to have that in today.
making up p/s line today and working on wiring.
#77
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Holley EFI Dominator and Forge line wheels diamond cut
We got the 4 link and the rearend in the car today. a 14 bolt 9.5 ring with a 4.10 gear. Shock wave air bag system. mounted the ForgeLine weels on the car for the first time. 7" outside lip NICE.
running the wire for the Dominator Holley EFI system.
Here is a shot of the Holley Dual pump fuel pump twin pumps will handle 1400 hp. more soon.
running the wire for the Dominator Holley EFI system.
Here is a shot of the Holley Dual pump fuel pump twin pumps will handle 1400 hp. more soon.
#78
Staging Lane
Thread Starter
Join Date: Dec 2006
Location: flanagan Il
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Been wiring all day only a few more thing left . got the doors opening on remote.
got the interior all wired up. working on the tail and turn signals almost ready to install int.
more soon.
got the interior all wired up. working on the tail and turn signals almost ready to install int.
more soon.