The 67 Convertable! LS7 4L85E Build
Thread Starter
Teching In
Joined: Feb 2008
Posts: 35
Likes: 0
From: Newton, NC
The 67 Convertable! LS7 4L85E Build GM LS7 crate engine
GM performance Parts 4L85E Super-matic transmission.
Car 67 ChevyII with a 63 convertible conversion.
Alston Chassis F/R
Wiring will consist of a ISIS based control system for the vehicle.
http://www.isispower.com/
I will do my best to capture pics as I go.
First we will start with engine install, then the project of the trans tunnel modification for the Massive 4L85E transmission.
---------------------------------------------------------------------
the beginning !
GM performance Parts 4L85E Super-matic transmission.
Car 67 ChevyII with a 63 convertible conversion.
Alston Chassis F/R
Wiring will consist of a ISIS based control system for the vehicle.
http://www.isispower.com/
I will do my best to capture pics as I go.
First we will start with engine install, then the project of the trans tunnel modification for the Massive 4L85E transmission.
---------------------------------------------------------------------
the beginning !
Thread Starter
Teching In
Joined: Feb 2008
Posts: 35
Likes: 0
From: Newton, NC
We have some issues with oil pan clearance.
So we have a oil pan form ATS-Speedteck (ATS & Speedteck have combined)
http://www.speedtechperformance.com/...218&prd218.htm
Oil pan intrusions
------------------------------------------------------------
MSD Starter
# 5096
http://www.msdignition.com/Products/...7_Engines.aspx
Note: the MSD starter comes in 100.00 less than a OEM unit
------------------------------------------------------------
ISIS 3 cell system with battery protection
http://www.isispower.com/index.html
-------------------------------------------------------------
Vintage air Air system with front drive BLACK
http://www.vintageair.com/ls.asp
-------------------------------------------------------------
So we have a oil pan form ATS-Speedteck (ATS & Speedteck have combined)
http://www.speedtechperformance.com/...218&prd218.htm
Oil pan intrusions
------------------------------------------------------------
MSD Starter
# 5096
http://www.msdignition.com/Products/...7_Engines.aspx
Note: the MSD starter comes in 100.00 less than a OEM unit
------------------------------------------------------------
ISIS 3 cell system with battery protection
http://www.isispower.com/index.html
-------------------------------------------------------------
Vintage air Air system with front drive BLACK
http://www.vintageair.com/ls.asp
-------------------------------------------------------------
Thread Starter
Teching In
Joined: Feb 2008
Posts: 35
Likes: 0
From: Newton, NC
We have to change oil pan.
So here is some inside LS7 bling.
Take notice of balanced crank, 6 bolt mains, CNC ported exhaust ports.
Dry sump system.
Oil pan rail has gasket riveted to the pan.
The engine had 3 gal of oil in it. Guess we hook up the tank and it pumps it into the tank!
So here is some inside LS7 bling.
Take notice of balanced crank, 6 bolt mains, CNC ported exhaust ports.
Dry sump system.
Oil pan rail has gasket riveted to the pan.
The engine had 3 gal of oil in it. Guess we hook up the tank and it pumps it into the tank!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Teching In
Joined: Feb 2008
Posts: 35
Likes: 0
From: Newton, NC
Nothing like a well engineered, high quality USA made part.
I am not trying to blow smoke up anyone butt!
But man, these are amazing!
I have never seen so much detail and workmanship.
Then when you install them they look absolute suitcase perfect!!!!!!
Hat off to Church Boys and Stainless works! :notworthy::notworthy::notworthy::notworthy:
I am not trying to blow smoke up anyone butt!
But man, these are amazing!
I have never seen so much detail and workmanship.
Then when you install them they look absolute suitcase perfect!!!!!!
Hat off to Church Boys and Stainless works! :notworthy::notworthy::notworthy::notworthy:
Really nice. I especially like the fact that you have the Kent-Moore Engine lift brackets.
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Thread Starter
Teching In
Joined: Feb 2008
Posts: 35
Likes: 0
From: Newton, NC
Part of the ISIS has arrived. The master cell and most of the wiring and relays.
The (2) control units with custom made lenth data link cables are on the way. Thanks to Jay at ISIS.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
The (2) control units with custom made lenth data link cables are on the way. Thanks to Jay at ISIS.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Thread Starter
Teching In
Joined: Feb 2008
Posts: 35
Likes: 0
From: Newton, NC
Chose not to use the factory front drive, besides, it's ugly.
For the money this was a better choice, everything is included.
http://www.vintageair.com/ls.asp
part # 174013
Note: Tuff Stuff did exchange the alternator. The alternator supplied was not black, was also a one wire system. Normal ok. With a GM ECU harness, it needs to get a signal for alternator, if not would have a charging fault code.
Dominic at Tuff Stuff exchanged the alternator no charge and also supplied a black unit. It did come with a adapter plug that I eliminated buy changing the pin socket on harness to plug directly.
NOTE:
Vintage air was a *** about the alternator problem. They have no idea how close they came to getting this complete front drive system back. They need to address there customer service. IMO
Al
Thats going to be a stupid fun ride when its done. The Isis system looks intimidating, I read the writeup CHP did some months back, I'm sure it's probably worth the coin but I would be getting in way over my head. Keep the pics and updates coming.