going to the dark side *engine is in*
#422
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mine is .595" lift and 250*/266* on a 112* LSA. I am pretty much expecting ptv clearance issues with the flattop/no valve relief LS2 pistons and L92 heads. I'm planning on doing the "flycut for free" mod using a couple spare valves and stick on sand paper. There is a thread on here about it. I already bought drill stops for a few bucks at Harbor Freight. IF I turn out to have plenty of room, I'm considering running 1.8:1 exhaust rockers to help out the weaker exhaust ports of the L92's. Haven't checked into mixing aftermarket & stock rockers on LSx motors though.
#428
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Hillsboro Kansas
Posts: 1,823
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
is there anything else you guys can think of i might need for my engine?
all i can think of is just valve springs, pushrods, throttle body, stall, starter, and headers...
all i can think of is just valve springs, pushrods, throttle body, stall, starter, and headers...
#432
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Hillsboro Kansas
Posts: 1,823
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nothing "local" around here... There is a f body salvage yard in wichita somewhere but Idk where its at. I bought one for $50 and it never showed up and the guy vanished.
In a couple weeks I'm putting another order into scoggins, for my valve springs and pushrods. Just hope i can check the length with the stock springs
In a couple weeks I'm putting another order into scoggins, for my valve springs and pushrods. Just hope i can check the length with the stock springs
#434
TECH Resident
iTrader: (21)
Join Date: Aug 2006
Location: Wichita KS
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nothing "local" around here... There is a f body salvage yard in wichita somewhere but Idk where its at. I bought one for $50 and it never showed up and the guy vanished.
In a couple weeks I'm putting another order into scoggins, for my valve springs and pushrods. Just hope i can check the length with the stock springs
In a couple weeks I'm putting another order into scoggins, for my valve springs and pushrods. Just hope i can check the length with the stock springs
Glad to see the car coming along, last i heard about the car you were buying lt1 parts from me haha.
#436
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Hillsboro Kansas
Posts: 1,823
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
dropped the heads off tonight, gonna be about a month wait, 100 to mill .030 and another 50 or so to jetwash and then beadblast them
a LOT more than i wanted to spend.
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)