When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you need it I have a list of the correct part #'s to make it all work. You will need to cut the welded mounts off the frame. If you are using truck accessory drive the PS pulley is a requirement.
PS pulley...Dorman 300-123
Frame brackets...3378 carpartsdiscount.com
Adapter brackets to engine...Dougs SK100 (most other similar should work)
Mounts....Energy Suspension 3-1117G
I used a Canton pan 13-274, pickup 13-275 and oil filter base 22-631.
Is This powersteering pulley smaller than the OE one?
Well it been awhile since ive updated this thread but car has went through some changes again here is a few pics.
Treadstone intercooler mock up<br/>
Ais trunk mount methanol kit.<br/>
Changed out the fast 102 for a holley high ram!
Freshened up the 12 bolt with Strange axles with ford bearing ends,eaton true trac, yukon 3.73 gears and rear disc brakes. Ended up busting stock housing so it got replaced with a Moser one.
10-10-2015, 08:17 PM
