LQ4 Dodge Ram!!!
#81
12 Second Club
Thread Starter
iTrader: (18)
Join Date: May 2011
Location: ArKansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If I can make a suggestion, unless you like a lot of vibration in your driveline and the rest of your vehicle, get some rubber or urethane mounts for the engine and transmission. Having no flex in them will cause premature failures in either block or transmission due to the excessive vibration. Think drag racing, guys that use solid mounts usually have the body stiffened up with roll cage to prevent twisting. Friend kept busting C4 tailshaft housings til he put a rubber trans mount in, allowed the motor/trans to flex enough on launch he quit busting housings.
#85
12 Second Club
Thread Starter
iTrader: (18)
Join Date: May 2011
Location: ArKansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'll be excited to get this thing on a scale and weigh it. Hopefully under 4000.
#89
12 Second Club
Thread Starter
iTrader: (18)
Join Date: May 2011
Location: ArKansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Id start keeping an eye out on the classifieds on here then. I picked up my 6.0 lq4 short block for $250. May just be worth it to put a 6.0 in it and be done with it.
#94
12 Second Club
Thread Starter
iTrader: (18)
Join Date: May 2011
Location: ArKansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well folks the truck finally runs!!! Need to get an exhaust on it so a decent tune can be done. Truck has good oil pressure. Had a "minor" trans cooler line leak but took care of that.
Also steering box input shaft seal has a leak. But thats to be expected with a 25+ year old truck with stock seals. Picked up a new seal kit.![](http://s101.photobucket.com/user/Firefighter2931/media/M2U00120.mp4.html)
https://www.facebook.com/photo.php?v=669366529778346
Also steering box input shaft seal has a leak. But thats to be expected with a 25+ year old truck with stock seals. Picked up a new seal kit.
https://www.facebook.com/photo.php?v=669366529778346
#97
12 Second Club
Thread Starter
iTrader: (18)
Join Date: May 2011
Location: ArKansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Did some driving around today. Fixing bugs here and there with the truck. Getting closer. Got some temp exhaust installed. 2.5" glasspacks right off the headers and a wideband. It will get a real system eventually.Doesn't even sound like an LS motor.
http://s101.photobucket.com/user/Fir...R5064.mp4.html
http://s101.photobucket.com/user/Fir...R5064.mp4.html
#98
#99
12 Second Club
Thread Starter
iTrader: (18)
Join Date: May 2011
Location: ArKansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
been a bit since my last update. Toasted the trans pump rotor idling into a parking lot. Had that fixed. Decided to upgrade all my trans cooler lines to -6an line. Have been waiting on those lines to come in. Hopefully I can get back to some tuning soon.