66 Chevelle LSA/4L90E Conversion
#1
TECH Fanatic
Thread Starter
66 Chevelle LSA/4L90E Conversion
So......Getting Bored and after selling off a few cars it's time to start another project.....I bought a just restored 66 SS 396 Marina Blue Chevelle Factory A/C car.........It's a decent resto but not perfect by any means.......so....the plans are to do the Brake, Suspension, and wheel and tire thingy to get that Pro Touring look ......and the car will never see a cone course....so...it will be a driver and Power Tour car.........Now for the Interesting stuff..........It's gonna get a 2013 Camaro ZL1/LSA 4L90E drivetrain........The factory A/C will be replaced with a aftermarket system from vintage air and the stock interior will be retained..........I know I'm going to have to cut out the trans tunnel and raise it to fit the trans....the end goal is to keep the stock console and shifter for the stock appearance.........Here are some starting pic's of the car......
And here's the engine........It's only got 2100 miles on it
Stay tuned....
Ken
And here's the engine........It's only got 2100 miles on it
Stay tuned....
Ken
#3
Thats my all time favorite car. Marina blue is a MUST color for 66s' IMO Are you going to upgrade the suspension and brakes too? Having 2 before, I know how pathetic the handling and brakes are. I wish DSE was around back then
#4
Yup. I just read your full post. Mybad, lol. Subscribing
#5
TECH Fanatic
Thread Starter
I've been ordering parts and they are starting to show up..........Complete RideTech suspension (Coil overs all around)......Holley Oil Pan.........Aluminum Radiator........Wilwood Brakes....Vintage Air system........and a Rick's vaporworx tank........so far.......When I bought the engine I also got the Intercooler, Pump, Harnesses, Fuel Pump system, Gas Pedal...ECM.............I already sent all the electrical stuff to Speartech for the mod's........ Here are some more Pic's....
All the harnesses going off to Speartech
The Engine less all the wiring....
Parts in the garage......
Ken
All the harnesses going off to Speartech
The Engine less all the wiring....
Parts in the garage......
Ken
#6
I didn't notice it was a KWHIZZ build. This will be a quality build for sure . What toys did you sell off?
The following users liked this post:
dec010974 (05-23-2020)
#7
TECH Fanatic
Thread Starter
Trending Topics
#12
TECH Fanatic
Thread Starter
I received more parts today......since the new Camaros have Electric Power Steering, I ordered a Kwik Performance raised alternator bracket assy along with their Power Steering Pump integrated into the brackets.....I also ordered a complete wire harness kit from American Autowire......The existing fuse panel in the car is showing it's age and is pretty much toast.....So....we are going to rewire the whole car.....The A/C compressor is a slight problem as with the blower belt tensioner taking up the area that would allow the raising of it.....so .......I am going to have to keep it down low and make my own brackets...........The Fun continues.....
Getting ready to start...........
Getting ready to start...........
#14
TECH Fanatic
Thread Starter
#15
TECH Fanatic
Thread Starter
It was hard to take a wrench to the first bolt to take this car apart.......But........Got a little bite into it today and the ball is now rolling...........Hope to have the LSA in place by the end of next week......Pic's to follow as things happen
The Wilwood Brake system will be here early next week and a Ricks Vaporworx tank is also on the way.....
Ken
The Wilwood Brake system will be here early next week and a Ricks Vaporworx tank is also on the way.....
Ken
#19
Teching In
Join Date: Sep 2008
Location: Shreveport, LA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Very cool build. I'm dying to squeeze an LSA into a muscle car. I'm sure you did the math, so how much do you save with the pull-out motor, as opposed to going with the "connect and cruise" package? Thanks and good luck!
Blanchard
70' El Camino LS2/4L60e
Blanchard
70' El Camino LS2/4L60e
#20
TECH Fanatic
Thread Starter
Ken