'85 Monte SS Twin ON3 70's
09-04-2014, 08:30 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Aug 2013
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
'85 Monte SS Twin ON3 70's Here's my little project. I drug it home as a roller last summer. It sat outside all winter as I gathered parts. I rolled it inside around the first of March.
As it sits now it's running and driving but, I haven't taken it to the track or dyno yet.
To start, I guess I'll upload the pics and a description.
Bringing the roller home.
the 85 in all the gory glory. pealing paint but, rust free and pretty straight.
the LC9 5.3
the LC9 hooked to a Bradco tH400 rmvb- tbrake
IT"S IN THE HOLE!
As it sits now it's running and driving but, I haven't taken it to the track or dyno yet.
To start, I guess I'll upload the pics and a description.
Bringing the roller home.
the 85 in all the gory glory. pealing paint but, rust free and pretty straight.
the LC9 5.3
the LC9 hooked to a Bradco tH400 rmvb- tbrake
IT"S IN THE HOLE!
09-04-2014, 08:37 PM
#2
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Aug 2013
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Circle D Billet converter
CXracing air to water core and 4 gal tank
8.8 out of a Fox Mustang Moser 31 spline , 3.55's
All bolted in using Trick Chassis stuff, Viking double adjustables.
09-04-2014, 08:54 PM
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Aug 2013
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Here's the parts list..
LC9 5.3 with 243's
238/248 .585/.595 113+3, BTR duel platinums
Twin On3 70's
1000cc injectors
Megasquirt 3x
TH400 with all the good stuff , brake
Circle D 3600 converter
8.8 with 3.55's ( all Moser)
Oh, twin SX pumps, 10an feeds Y'd to an 8an to the regulator.
E85 fuel
Stock springs in the rear with Viking doubles
Spohn Extreme drag ARB
6 cyl springs up front with Viking doubles
and a ton of small stuff I'm forgetting.lol My goal is to hit a 5.90 in the 8th.
LC9 5.3 with 243's
238/248 .585/.595 113+3, BTR duel platinums
Twin On3 70's
1000cc injectors
Megasquirt 3x
TH400 with all the good stuff , brake
Circle D 3600 converter
8.8 with 3.55's ( all Moser)
Oh, twin SX pumps, 10an feeds Y'd to an 8an to the regulator.
E85 fuel
Stock springs in the rear with Viking doubles
Spohn Extreme drag ARB
6 cyl springs up front with Viking doubles
and a ton of small stuff I'm forgetting.lol My goal is to hit a 5.90 in the 8th.
Trending Topics
09-04-2014, 09:17 PM
#10
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Aug 2013
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I took it all the way down, finished it in 1000. Then washed it with Dawn dish soap. then wax & grease remover. Adhesion promoter, then prime and paint as normal.
And Thanks man.
And I'd also like to thank everyone on here, I lurked for a long time, reading up and deciding how I wanted to do this. The people and this board are very helpful.
And Thanks man.
And I'd also like to thank everyone on here, I lurked for a long time, reading up and deciding how I wanted to do this. The people and this board are very helpful.
09-05-2014, 10:22 AM
#13
You gotta love a good looking G-Body! 
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
09-05-2014, 04:37 PM
#15
we have almost same setup I have a 79 camaro 5.3 same turbos, th350, a2w intercooler, using hptuners, built 10 bolt 4:10 gears all cal tracs suspension. I have been tuning every day its coming along slowly but good. How do you like megasquirt I would love to hear about it
09-06-2014, 11:25 AM
#16
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Aug 2013
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
we have almost same setup I have a 79 camaro 5.3 same turbos, th350, a2w intercooler, using hptuners, built 10 bolt 4:10 gears all cal tracs suspension. I have been tuning every day its coming along slowly but good. How do you like megasquirt I would love to hear about it
