When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Boy, that truck is really clean. The Holley fuel injection system looks nice. Looks like that truck has had some suspension upgrades. Any idea of the brand of parts used?
belltech 2.5" spindles with belltech 2" drop springs up front, belltech flip kit in rear. also added were belltech 1 3/8" sway bars front and rear.
belltech 2.5" spindles with belltech 2" drop springs up front, belltech flip kit in rear. also added were belltech 1 3/8" sway bars front and rear.
Quit acting like you know anything about this truck you frickin' troller...just bustin' your nuts! I just now realized that I misquoted the model year of your truck according to your screen name; looks like I need to do a little bit of editing.
Today's update on this thread is a layout photo of the Hooker GM squarebody truck LS swap long-tube headers. I'm including this image due to the limited ability to see their bend geometry in the previous install photos. This particular sample is representative of the silver ceramic mild steel version of these headers; you will also be able to order them in stainless steel with all the upgraded components that come with that material choice.
You'll only have to wait until next month for these to start rolling out, so it's not too long of a wait for something that you'll really appreciate when you go to install and use them.
Please tell me that GM A-bodies are next on the list....:-) Otherwise, I might have to buy a truck.
Andrew
Hey Andrew. The A-bodies are not the next application on the list, but I know we'll eventually get to them. Folks higher up the ladder than me I pick the applications we do, I just design and develop them. I guess you need to start looking for that new squarebody truck of yours.
Toddoky, have you posted this info on any of the other forums for square bodies? There are a ton of guys over at 67-72chevytrucks (and I'm sure others) that are doing this swap in the 73-87(91) square bodies. I bet they'd be stoked to see some of these pre-production photos.
Toddoky, have you posted this info on any of the other forums for square bodies? There are a ton of guys over at 67-72chevytrucks (and I'm sure others) that are doing this swap in the 73-87(91) square bodies. I bet they'd be stoked to see some of these pre-production photos.
Somebody posted a link to this thread in the LS swap section. They beat me to it.
Toddoky, have you posted this info on any of the other forums for square bodies? There are a ton of guys over at 67-72chevytrucks (and I'm sure others) that are doing this swap in the 73-87(91) square bodies. I bet they'd be stoked to see some of these pre-production photos.
By all means, spread the word. I'm aware of that site and tried to sign on as a member and was denied by the administrators. I asked for an explanation as to why I was denied but received no response...I'm a squarebody owner in the middle of my own project for cryin' out loud. I post on quite a few forums so I can only assume they recognized my screen name as being associated with Holley and didn't want me promoting the brand there. If they took the time to read my posts they would fiqure out that I only dole out technical information and never solicit sales. The way I see it, it's a disservice to the membership over there to deny you guys information regarding the latest products that are available to your trucks. It's their business to run as they see fit to do so...maybe someday I can join you guys directly over there as a fellow squarebody owner (I've had 3 so far).
Send member 84c10 a PM message about your interest, he's the owner of the red truck shown here and also the individual who fabricated the intake tube. I asked him about it and he seemed somewhat receptive to the idea.
Send member 84c10 a PM message about your interest, he's the owner of the red truck shown here and also the individual who fabricated the intake tube. I asked him about it and he seemed somewhat receptive to the idea.
By all means, spread the word. I'm aware of that site and tried to sign on as a member and was denied by the administrators. I asked for an explanation as to why I was denied but received no response...I'm a squarebody owner in the middle of my own project for cryin' out loud. I post on quite a few forums so I can only assume they recognized my screen name as being associated with Holley and didn't want me promoting the brand there. If they took the time to read my posts they would fiqure out that I only dole out technical information and never solicit sales. The way I see it, it's a disservice to the membership over there to deny you guys information regarding the latest products that are available to your trucks. It's their business to run as they see fit to do so...maybe someday I can join you guys directly over there as a fellow squarebody owner (I've had 3 so far).
Wow that's crazy especially since they have other businesses that are members and chime in pushing their products/services whenever someone asks about modifying a harness or whatever... I think it's great to have sponsor's and their employees/representatives as active members that can answer questions and give their first hand experience like everyone does here on ls1tech. Especially when someone who own's a specific vehicle that said forum is geared towards like yourself
Thanks again for looking out for us square body folks (I'm on my third as well). I'm looking forward to trying out one of your kits once I get my hands on a smog exempt truck.
Wow that's crazy especially since they have other businesses that are members and chime in pushing their products/services whenever someone asks about modifying a harness or whatever... I think it's great to have sponsor's and their employees/representatives as active members that can answer questions and give their first hand experience like everyone does here on ls1tech. Especially when someone who own's a specific vehicle that said forum is geared towards like yourself
Thanks again for looking out for us square body folks (I'm on my third as well). I'm looking forward to trying out one of your kits once I get my hands on a smog exempt truck.
I agree. I was especially aggravated about them not responding as to why my membership request was denied...they could've at least said that Holley had to become a sponsor for me to be able to sign-up as a member, or that I would have to agree not to promote Holley/Hooker products on the forum, which I would have agreed to since my primary interest was for personal use. It's all good as I know the word about this new system of parts will get spread around over there anyway from enthusiasts such as yourself who frequent multiple sites...tell everyone over there I send my regards.
I need that cross member. I have an '84 with an older LQ4 so let me know when they become available.
Welcome kainedogg. The crossmember turned out so well I'm going to use one myself in my 1979 C20 project and I don't even have an LS in it.
I don't have the bandwidth to be able to notify everyone on a one-by-one basis when these components become available, but If you subscribe to this thread I will be making those announcements here as they do hit the shelves.