64-67 chevelle pcm locations
#1
64-67 chevelle pcm locations
ok so still planning out my 67 chevelle LS 6l swap - and today was wandering around with that huge chunk of aluminum we call a pcm
I can find no suitable place for it as it takes up so much room
so you guys out there who have done these early chevelle swaps - where did you locate your PCM?
there is no room under my dash, nor on the firewall, so maybe on the inner fender like the factory truck does?
HELP!!!!!
I can find no suitable place for it as it takes up so much room
so you guys out there who have done these early chevelle swaps - where did you locate your PCM?
there is no room under my dash, nor on the firewall, so maybe on the inner fender like the factory truck does?
HELP!!!!!
#2
I am running mine on the LH fender up high. The plug just peeks out under the edge of the fender brace. Its behind the relays in the picture. The two stainless cap screws are actually holding the pcm, piece of aluminum angle to two bolts on the pcm and then bolts to the fender. Second picture shows the cover over the fuse block and relays.
[/URL]
[/URL]
[/URL]
[/URL]
#4
TECH Enthusiast
Mine is located in the trunk . I did modify my rear seat bottom as to not crush the wires and will have a center console that runs from the dash to the rear seat . JOHN
#7
TECH Resident
iTrader: (1)
ok so still planning out my 67 chevelle LS 6l swap - and today was wandering around with that huge chunk of aluminum we call a pcm
I can find no suitable place for it as it takes up so much room
so you guys out there who have done these early chevelle swaps - where did you locate your PCM?
there is no room under my dash, nor on the firewall, so maybe on the inner fender like the factory truck does?
HELP!!!!!
I can find no suitable place for it as it takes up so much room
so you guys out there who have done these early chevelle swaps - where did you locate your PCM?
there is no room under my dash, nor on the firewall, so maybe on the inner fender like the factory truck does?
HELP!!!!!
Russ Kemp