Just another LS notch #racestatus
#45
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
#46
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
pulled the wheels apart today do get them repolished and clean some small corrosion between the rear beads and the rims. maybe I wont need a tire machine to take them apart again..contacted weld racing and they are sending me out new stickers for the wheels. I was shocked when he said he will just mail me some.
also ordered all new arp stainless bolts for the centers today.
also ordered all new arp stainless bolts for the centers today.
#49
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
well got some stuff knocked out on the car last night. plated the frame rails and welded a 2x2 in will also tie in the rear tub of the car as well
also got some pictures from Jason at fcs race. he is an import guy and amazing fabricator. he is making my fuel cell and catch can for the mustang
while under the car I was thinking about replacing the torque boxes with ones from wild rides but my subframe connectors are tied into them so Im going to just plate them up for and now and see how it goes
also got some pictures from Jason at fcs race. he is an import guy and amazing fabricator. he is making my fuel cell and catch can for the mustang
while under the car I was thinking about replacing the torque boxes with ones from wild rides but my subframe connectors are tied into them so Im going to just plate them up for and now and see how it goes
#51
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
#52
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
got some work done to the sled this weekend. I gotta figure out this bumper gap lol
getting the turbo mocked up
got the intercooler mounted somewhat as well. need to get the bumper beam in to figure out the rest
im ready to do burnouts.....
mounted my co2 bottle which will either run my boost controller or parachute release
got some updates from Jason at FCS and my fuel cell is complete!
also got an update from my powder coater at snailor built garage
getting the turbo mocked up
got the intercooler mounted somewhat as well. need to get the bumper beam in to figure out the rest
im ready to do burnouts.....
mounted my co2 bottle which will either run my boost controller or parachute release
got some updates from Jason at FCS and my fuel cell is complete!
also got an update from my powder coater at snailor built garage
#54
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
yeah I had it originally mounted like yours and then thinking about a 5" exhaust running through the bay didn't make me happy. im still not 100% happy with this and it might get redone but it will still be in that spot
#58
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
#60
TECH Apprentice
Thread Starter
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts