93 S10 LS Swap
#104
TECH Enthusiast
iTrader: (10)
Join Date: May 2006
Location: phx , az
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
looks nice !!!
i just picked up a 03 Xtreme blazer , and will be looking to do a LS swap soon
are you going to be at LS fest west with it ? or will the swap parts used be there on display ?
i just picked up a 03 Xtreme blazer , and will be looking to do a LS swap soon
are you going to be at LS fest west with it ? or will the swap parts used be there on display ?
#105
TECH Addict
iTrader: (47)
My original statement may have been wrong because I still forget they did that rebranding. I don't remember how many I/Os the original Terminator had, but I want to say 4? It wasn't many.
#106
Holley started out with a Terminator and a Dominator. Since they have rebranded their products some. In the beginning the Terminator has less I/O's than the Dominator. Now they are selling the "Terminator" as a kit with the Dominator (Higher I/O count) PCM. IMO, Holley just made things more confusing by doing that.
My original statement may have been wrong because I still forget they did that rebranding. I don't remember how many I/Os the original Terminator had, but I want to say 4? It wasn't many.
My original statement may have been wrong because I still forget they did that rebranding. I don't remember how many I/Os the original Terminator had, but I want to say 4? It wasn't many.
#116
Launching!
iTrader: (6)
Man this thread is awesome! I wish these swap parts were available 10 years ago when I did my first S10 LS swap on a 96. I’ve got a 92 Sonoma GT that I am swapping a healthy 5.3/80e into.
Any update on the availability of the swap crossmember and the exhaust kit you put on this truck? I seen the engine mounts and the Flowtech 1 3/4 long tube headers on the Holley website but can’t find anything other than the three crossmember part numbers and nothing on the exhaust kit.
Any update on the availability of the swap crossmember and the exhaust kit you put on this truck? I seen the engine mounts and the Flowtech 1 3/4 long tube headers on the Holley website but can’t find anything other than the three crossmember part numbers and nothing on the exhaust kit.
#117
Teching In
[QUOTE=HotRodV6;19946857
Any update on the availability of the swap crossmember and the exhaust kit you put on this truck? I seen the engine mounts and the Flowtech 1 3/4 long tube headers on the Holley website but can’t find anything other than the three crossmember part numbers and nothing on the exhaust kit.
[/QUOTE]
Wonder if the headers already got removed from the site, I cant find them..? Only thing listed for s-10 is the motor mounts.
Any update on the availability of the swap crossmember and the exhaust kit you put on this truck? I seen the engine mounts and the Flowtech 1 3/4 long tube headers on the Holley website but can’t find anything other than the three crossmember part numbers and nothing on the exhaust kit.
[/QUOTE]
Wonder if the headers already got removed from the site, I cant find them..? Only thing listed for s-10 is the motor mounts.
#118
Launching!
iTrader: (6)
Flowtech has long tube 1 3/4 headers for the S10, they offer them in painted and ceramic coated mild steel and 304 and 409 stainless in natural or polished.
I called today ans aaked about the swap trans crossmember and was told they are coming soon along with the exhaust system.
I called today ans aaked about the swap trans crossmember and was told they are coming soon along with the exhaust system.
#119
Teching In
Flowtech has long tube 1 3/4 headers for the S10, they offer them in painted and ceramic coated mild steel and 304 and 409 stainless in natural or polished.
I called today ans aaked about the swap trans crossmember and was told they are coming soon along with the exhaust system.
I called today ans aaked about the swap trans crossmember and was told they are coming soon along with the exhaust system.
#120
The headers are being built now so will be on the shelf soon, the exhaust systems will follow behind those. Crossmembers will be the last thing to hit the shelf and not sure on the date yet. The Flowtech headers mentioned above were not developed with the Hooker S10 swap components so I can't say if they will work or not.