Just another turbo s10
Thread Starter
Staging Lane
Joined: Apr 2018
Posts: 81
Likes: 0
From: Altamont tennessee
Just another turbo s10 just finishing up with my fbody build, and I wished I would’ve had a build thread on it, so I’m gonna start one for my s10. Body is a 94 single cab 4.3/4l60e. Truck is actually a true ss truck. Plan is 5.3, 400 turbo, twin 66/73 vs racing turbos, 9 inch, nothing to fancy. Original plan was getting a gen 3 5.3, keeping stock crank, and using gen 4 rods and pistons, but I ended up finding a 5.3 with wiring, Ecm, intake, and heads for a steal. But it had a spun rod bearing. Thought it might not be too bad but it’s absolutely trashed the crank. So now I’m debating on going forged bottom end or just buying a new crank and throwing a set of gen 4 rods and pistons in. I’ll post somemore pictures tomorrow
Thread Starter
Staging Lane
Joined: Apr 2018
Posts: 81
Likes: 0
From: Altamont tennessee
Trending Topics
Thread Starter
Staging Lane
Joined: Apr 2018
Posts: 81
Likes: 0
From: Altamont tennessee
Update: ended up getting a good gen 3 crank and a set of gen 4 rods and pistons. Also picked up a musclecar oil pan, styled after the h3 alpha. Headed to the machine shop Monday to get rotating assembly balanced and new cam bearings put in. Next step is picking a cam vendor. Debating on Ljms and btr.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Staging Lane
Joined: Apr 2018
Posts: 81
Likes: 0
From: Altamont tennessee
Thread Starter
Staging Lane
Joined: Apr 2018
Posts: 81
Likes: 0
From: Altamont tennessee
this was my uncles truck, he passed away in a wreck when i was around 8, it was gave to another uncle, i saved up enough money to buy a 1996 extended cab silverado when i was 15, and ended up only keeping it 2 weeks before i talked my uncle into trading with me, so its been in the family for quite awhile. i've owned it 7 years now. its been a lemon of a truck. has 140k miles and is on its 3rd 4.3. first one the oil cooler line backed out of the filter base and ran it dry at 60k miles, second one was when i had it, several cam lobes were trashed, ended up finding a new long block for cheap so i swapped it in. new engine probably has less than 1k miles. just bored with the 4.3 now i restoring little things on the truck as im building it
TECH Regular
Joined: Dec 2014
Posts: 484
Likes: 18
From: Emory Texas currently
This is my 94 s10. Iron 5.3 bored out to ls1 forged bottom end s476 turbo. Its mostly just for street use home.made caltracs dual in tank fuel pumps most fun of all the ls cars we have
Thread Starter
Staging Lane
Joined: Apr 2018
Posts: 81
Likes: 0
From: Altamont tennessee
Got everything over to the machine shop last week. I’ve been bored with nothing to do so I went ahead and started on my 8.8. Got the long side axle out tonight and am going to cut it down 3 inches and weld it back tomorrow.
I'll be interested to see you get twins on this. I have thought about selling my single and doing twins just because I think packaging might be easier. I want to keep my a/c and inner fenders, and then it starts getting tight. I think I will have to ditch the factory ac and do a vintage air unit.