Mz3 SBC

2000 Mz3 Coupe
2006 GTO LS2 / 56


http://www.ponycars.net/eriksMcoupe.htm

this was my previous build....motor now in a new happy home. Car being prepped.

Welcome any info on LS2 bmw swap advice

rmvlt1100

iTrader: (1)

Still building, 1965 Cheyv C-10 fleetside short bed. 5.3L with 4L60E. LS 6 intake, Comp Cams 265 LSR cam. Still working on getting some pictures up-loaded. This web site has help me with this conversion to an LS style engine. Thank You.

mike2727

Never done building, but that is half the fun

E36 M3 Coupe with LS2 + T56

Engine mods: L92 heads / L76 intake / custom headers / custom cam

http://www.streetfire.net/photo/chin...63_1984890.htm

http://www.streetfire.net/photo/dscn0116jpg_1958478.htm

Mike

StevieGets

69 Rally Sport Camaro
454 LSX
Fast 102 Intake
Fast Throttle Body
GM performance Muscle car oil pan kit
4 wheel disc-Right Stuff
Moser hd 12 Bolt Tru-Trac 3.73 posi

StevieGets

I am building a project that I have had for 23 years. I now have the time and money to make this nice. As you see I have the starts of a very good project that I will post on here as I go. I want to do this right the first time. I do not see in here a 454 LSX 69 Fuel Injected Camaro, am I the only one that wants to do a 69 454 LSX Camaro with Fast 102 setup.

shanezz

1973 LS2,T-56,tubular control arms,coilovers,18s and 20s
http://www.youtube.com/watch?v=d_f9i8MrYTo

6.0L mustang philly

1993 mustang lx
2001 6.0 lq4/2002 4l80e
big turbo someday

LS2-C/10

iTrader: (1)

I've got a 70' C/10 I'm building with a little help from some friends. It has a full round tube chassis in the works and getting a 1991 Corvette C4 suspension under it. I have a LS2 out of a 2005 Chevy SSR with a t56 I am planning on using for power. It started out as only getting rocker panels and cab corners, and here we are lol

MMMPSHH

iTrader: (1)

Im currently in the process of building a 91 300zx with a LQ9 and a 94mm thumper. I'll start a thread when progress is further along... if its worthy, lol

Carguyrob598

I'm rebuilding my Factory Five cobra with a ls376/480 crate with a tko 600. Almost done, just some wiring and details left.

sdetweil

1956 Ford F100, LM7/700-R4 tranny..

Sam

and a 69 C10, LM7/4L60e, air bagged, disc brakes all around.. starting from the rear (engine mounts from CPP delayed)
http://67-72chevytrucks.com/vboard/s...d.php?t=492064

01badz28

iTrader: (5)

1) 2001 Camaro Z28, MN6
2) L92 converted to LS3 (VVT eliminated), stock T-56 & 10 bolt





Crappy exhaust vid:

http://www.youtube.com/watch?v=axj64uBdR14

Build thread is here:

https://ls1tech.com/forums/generatio...-camaro-3.html

rmvlt1100

iTrader: (1)

My conversion is a 2005 5.3L with a 4L60E trans into a 1965 Chevy C 10. I changed the Intake to a LS 6 intake with a DBW throttle body. Changed the cam to a Comp Cams LSR™, 265LR H2 grind with new springs and rebuilt rocker arms. LS 1 water pump. So far everything is going good. Still need to get headers and finished the fuel system. I will add a couple of pictures and a link to my photo bucket.

Photo Bucket: http://s1224.photobucket.com/albums/...010%20Project/

For some reason I can't get the pictures to attched, I will try to later. Please look at the Photo Bucket link.

9010RX7

iTrader: (2)

Starting to piece together my 94 RX7 with LS2 403 stroker/ L92 head setup T56 trans. So far motor is nearly complete, just need the cam. Working on all the other bits.

jmmotorsports

iTrader: (3)

73 Porsche 914
2000 Corvette LS1 engine, Porsche 901 transaxle
8&9 X 17 Fikse wheels,911 front suspension,steel flares,custom paint.
Conversion,body and paint by JM Motorsports.

COOP372600

I am a newbe and i am going to convert my 85 silverado to the 5.3l or 6.0l engine and 4l60e transmission. I need all of the info starting from the cooling system to the wiring harness. Questions like; what radiator should i use? What fan? What air condition pump fittings? What shift linkage to use. How to run the wires and so on? I will let you know later on of which engine i am going to go with.
Thanks.

Stovebolter

Just realized I never gave any updates. Here is a link to my build. At this point the project hasn't been touched for a couple years (restored a 65 Camino for my son instead), but I'm gearing up to pull the trigger on the LS this spring.

1936 Chevrolet Truck
01 WS6 LS1/4L60E

Link to build at present state: http://http://www.hotrodders.com/forum/journal.php?action=view&journalid=66022&page=1&per page=5&reverse=

Cheers!
David

hubbcapp

I have a 56- GMC p/u that I have installed an LS-1 / 4L60e conversion, Ford- 9", 70 Camaro sub-frame, disc brakes etc, etc, Trans has been rebuilt but still wont shift pass 2nd gear, "ugggg"! so far so good, it's been fun but a nail bitting experience. THANK GOD FOR LS1 TECH. Any suggestions are welcomed.
Would like to add pics but not sure how to.

Beyond Static

iTrader: (5)

1965 Buick LeSabre
5.3L using the truck intake
4L60e

Abrasive Trader

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]