nopostduece

1971 Nova, orange on cream, 2 door, 4speed barn find. Been stored inside sense 1980. Front disc brake conversion, 9" 4:56s, locker, on stock steel wheels with hubcaps (:

06, corvette LS2, stock bottom end, custom grind NO2 cam .236/242@50 .601/.610 114lsa, LS7 lifters, comp cromo push rods, Lunati gold duel spring kit, ported 243s, ported Victor Jr. Holley 850HP, NX stage6 plate.

Muncie M22, Center Force DFX 6puck sprung disc and 2500lb pressure plate

hemiqc2003

66 Chevelle
02 6.0 carb'd with 4L60E

tsnow678

iTrader: (3)

1969 Camaro Z/28 (clone) Speedway blue w/white stripes, black standard interior (upgrading to the 02 Camaro Ebony leather seats front and rear), three point seatbelts front and rear, 8.5" 10 bolt 3.42:1 posi Moser axles and Trick Flow cover, 408 all-forged balanced LS stroker 11.5:1 compression ARP main studs, ARP head bolts, Katech timing chain, ATI balancer, Melling oil pump, L92 heads w/ .660" Patriot springs and titanium retainers , LS3 intake w/42lb injectors 96mm throttle body, LS7 lifters, custom Comp Cam .631"/.657" lift, 1-7/8" Dynatech ceramic coated headers, American Thunder Series 2-1/2" Flowmaster exhaust, T56 trans Hurst shifter with an LS6 clutch, LS6 valley cover, Moroso oil pan w/remote oil filter, 4 wheel disc brakes, modified stock fuel tank with a 2003 Ford F350 6.8l mid ship fuel pump and Corvette filter/regulator, Vintage Air Gen IV sure fit a/c with a Kwik bracket, GTO water pump, 08 Corvette alternator bracket w/ 08 Corvette clutch pulley alternator.

Twin_Turbo

iTrader: (9)

82 Corvette 04 GTO LS1/T56
82 Trans Am LS?/F body T56

dennymelcher

2003 S-10 Xtreme, Extended cab, White.
6.0 LS2, 4L70e, C4 Vette Independent Rear, frame narrowed 6in., tubbed 3in., Cantilevered shocks.
Baer 13" front, C4 discs rear, all dimpled and slotted. 255/45x18 front, 295/35x19 rear.
2011 Hot Rod Power Tour, Long Hauler and registered for 2012 (Detroit to Irving, TX).

crowtree99

iTrader: (1)

1969 chevelle
2001 lq4, 4l60
12 bolt rear, 3.73 posi
coilover rear
vintage air
all stock so far (collecting parts)
tuned by Doc at EFI Alchemy, Green Cove Springs, Florida
300rwhp, 340torque, all stock and stock truck manifolds.
Will be happy with 350rwhp so fairly easy to reach I think.

schary

Here are some of the latest shots..
68 camaro
modified l92 / ventura speed center serpentine drive system
t56 magnum
12 bolt

thanks for all the help !!!

OneOffStroker

I'm swapping an LM7/4L60E into my '69 Suburban this weekend. Well, that and a ton of other stuff. I'm rebuilding all of the suspension, brakes, and steering, too. Also...I have a lot of rust repair on the cowl, firewall, and floorboards. I'm shooting for near completion of everything in 4 days. Wish me luck.

sleeper507

This my build a .79 malibu 4 door my grandma bought new .currently installing a 5.3 out of a 04 chevy ,a 4l60 e tranny ,car is lowered ,3 inches front 1 inch rear sitting on foose rims ,repainted viper blue ...interior all redone in black ,car was originally brown.

GreazyDaMonsta

1979 monte carlo 305 th350
5.3 on a th350

sleeper507

I have put in a 5.3 in my 79 malibu .fairly easy swap .have the 4l60e tranny ..got the power plant and tranny and harness from just chevy trucks ..motor mount kit from brp. Fuel set up from summit ...exhaust is truck to massaged pipes to clear the frame .have to shorten driveshaft ..shifter out of Monte ss ..still need the mast oil pan ..if you put truck motor in car --- don't do it in a low one .!!! Try to get pics up

COBRA.LS1

This is a car I built several years ago and am thinking of selling. 2000 LS1 with t56 with 50% od and 4.11 rear with discs all around. Car weighs 2100 and is scary fast.
Josh

ls1wrx

1991 nissan truck bodydropped to the doors

ls1/4L60e
everything is brand new. new rear end to come just got it running last night
has camaro interior dash steering column...we did the whole harness out of a 99 SS so we can tune easy and still read codes...pics saturday

Joe325

1994 BMW 325i
LS1/T56
3.73 gears 40% lock up

73metalman

1965 Corvair 2 door hardtop

997 Porsche 6spd trans/LS4 w/LS2 intake

C5 rear suspension-rear engine application

pics -http://www.facebook.com/media/set/?set=a.10150410423292351.388985.714102350&type=3

maddoglou454

Looking for a 700R4-4L60-4L60E-4L65E-4L70E-4L80E,Please contact me for a professional consultation regarding your needs. We are happy to provide you with references both here in the United States and Internationally. Be sure to check out our website at maddogtransmissions.com

Hear what our customers and fans say on our Facebook Page at www.facebook.com/maddogtransmissions

We also accept orders over the phone. Be sure to contact us and we will recommend the correct transmission for your application. For your convenience, we accept PayPal and all major credit and debit cards.

If you prefer, we can call you personally, just e-mail us your phone number.

All our transmissions are very strong and reliable, and can be used for everyday driving. Extended warranties are also available.

Thank You,
"Mad Dog" Lou

Mad Dog Transmissions
Phone 770-781-0949
Fax 770-781-0969

Web: www.maddogtransmissions.com
Facebook: www.facebook.com/maddogtransmissions
Twitter: www.twitter.com/maddoglou
YouTube: www.youtube.com/maddogtransmissions

Vetteman61

iTrader: (1)

1) 1937 Chevrolet 4 door
2) 5.3 LQ4 from 2003 Silverado with intake. 4l60E trans. '99 Ford Explorer
rear end.
3) My build thread:
http://www.hotrodders.com/forum/jour...ge=1&reverse=1


Thanks,
Brandon

Avanti

1963 Studebaker Avanti
2011 LS3 E-Rod

Symon623

Been running a 02 4.3/700r4/203/D300 combo for 5 years and decided it was time for the other 2 cylinders..... Was actually shopping for a 5.3 but ran accross a deal on a 6.0 so here we are;

Recipient; 85 Toyota 4x4 heavily modified for rock crawling and general offroading
Donor; 03 Chevy 1500 HD
Rest of the DT; built 700r4 with lockup, NP203 range box, Jeep Dana 300 transfer case, Dana 60's Front and rear. 5.38 gears.

Here's a link to the swap;

http://www.pirate4x4.com/forum/showt...ighlight=syota

Link to Pics;

http://s715.photobucket.com/albums/w...ERS/Syota%206/

http://youtu.be/jmjWtevHYhE

64TypeALSX

Just getting organized for this project. Looking for a stock LS and auto transmission. Trying to decide on conversion kits and looking for step by step instructions. Any suggestions? Thanks.