LH6 & 4L60E into a 1970 GTO Judge
Removing pontiac 400 & TH400

https://ls1tech.com/forums/conversio...ld-thread.html

 

1990 Toyota Supra Turbo
418 Forged LS3 block 600+rwhp
Supercharger (Or may change to twin turbo!)
Powerglide / trans brake

Engine was previously in my 2006 Corvette, with a stalled 6L80e trans. The trans is the entire reason for purchasing the new car. Going to eliminate that little problem!

 

1968 MGB GT
going with LQ9 408
dragon slayer crank
PRC 237 heads
Texas speed cam
T56 trans

 

1963 c10
going with 4.8 with a turbo
4l80e

 

What do I need to swap from a 2001 LS1 to a 2006 LS2 corvette? Mark G

 

Looking into doing an ls swap in my 03 mustang
I'd like to go with a 6.0 iron block motor with a t56 on nitrous
Just curious what k member, headers, cam, would be the best for this application

 

1)1974 Opel Manta
2) 5.3/glide
3) http://s1366.photobucket.com/user/el...=recent&page=1 pics are kind of random due to how I uploaded em.

Some quick info on the car. It's a Belgian made car, found it by chance a few blocks from my house. They originally came with an inline 4 cyl, 4 speed and weighed about 2180 pounds showroom stock. It had power discs in the front, a 3 link type rear suspension and f/r sway bars. I did EXTENSIVE mods to get the current combo in it. 4 months of 60 hrs a week in the garage trying to make drag week 14'. We finished the car the night before and it literally had 80 miles on it before driving it from KC to Tulsa. It was untuned and untested. Even with the tall gears and 2 speed transmission it went 12.3 and got 20 mpg avg for the week. With the exception of a couple of sensors swaps we didn't turn a wrench on it all week. Big thanks to my Friend Joey Grier for his tuning help and Collin Williams for all the labor and fab work. It has a narrowed 8.8 with all the good stuff from strange in it. We had to narrow it 12.5 inches to get it under the car. We also converted the rear suspension to a torque arm set up. The motor is a stock 04 5.3 short block, ported/polished and milled 241's with BTR valve train, ported LS2 intake, ported Edelbrock TB and custom exhaust. The glide has a tranny brake, manual valve body and a TCI 3400 stall. I'm running 235/50/15 M/T drag radials in the back. It's got Strange double adjustable coil overs in the front and strange single adj shocks in the rear on stock springs
Car was originally going to be a cam/heads NOS car which is why I went with the glide. I had 3.08 gears in when I competed at drag week but since I didn't have time to get the cage in it I scrapped the NOS due to the safety rules. I've since put in 4.10's in anticipation of my new mods coming early spring. I'm pulling the glide and going with a 200R4 and adding more cubes as well. The cage will go in once all the motor/tranny stuff is finished. Car currently is an easy 11.50 time slip. After the new mods my goal is mid 10's. It weighs about 2500 with me in it.

 

Swapping in a 5.3L out of a Tahoe.

 

Putting a 6.0/4l80e into the truck. Manual valve body with trans brake, Ford 9 inch with 4.30 gears, mid length headers, and Zex perimeter nitrous kit under a Dominator 950.


This is going to be a twin to my last one, but this one has a dose of Viagra.

 

1953 Studebaker Commander with a LS6 from an Cadillac CTS v 4l60e transmisson and ford 8.8 rearend.
[

IMG]http://cimg0.ibsrv.net/gimg/ls1tech.com-vbulletin/744x558/80-studebaker_pics_7_11_005_505d7e83c554c0e454e4d4c84 c784c69fbf9b0c1.jpg[/IMG]

 

87 Buick Regal Turbo T-type. 370 cube LQ4, stock 317 heads, Holley Hi-ram, 102mm Nick Williams TB, Borg Warner S475, Stage 2 Snow meth kit, 4L80E with Transgo manual kit, A/W intercooler, Flipped-up and forward truck manifolds, Accel Gen 7 DFI.

Runs great, no track times or dyno, yet. Just my son and I driving around, up until January 2nd, can't wait for spring.

 

New project here
1950 Chevy 1/2 ton Panel Truck
LQ4 6.0 engine
4l80 trans
Rear axle, unsure at moment
New IFS, unsure which kit/manufacture at moment
Numerous body mods, first to get it a bit lower
Trying to ad pic
Mike

 

1981 Firebird one owner car. Getting a LQ9/4l60 Any input on the motor build is appreciated since I am new to LS based engines and have only had experience with SBC carb engines.

 

1967 camaro had sbc 350 w muncie 4spd
swapped an ls1/t56


https://ls1tech.com/forums/conversio...67-camaro.html

 

5.3 LM7 ('02 Silverado) into 1974 Nova w/ 4l60e

Build Thread

 

We are putting a 2002 LM7 5.3 & 4L60E in our 1960 Chevy Impala.

https://ls1tech.com/forums/conversio...-5-3-swap.html

 

1965 impala coupe getting a lq4 and a 4l80e. Turbo someday I hope.

 

I was only looking for a good body and frame, but I ended up finding a complete running car. I purchased this 37 Ford 2 door Sedan and drove it 220 miles to my house with the original Flathead drivetrain. The first part of my plan is to upgrade the car with a modern chassis and driveline including an LS motor. More soon on the build.

 

Great starting point...............Keep the pic's coming

 

Hi I have a 1970 Olds cutlass I would like do do a 5.3 swap on. I want to do a carburetor conversion kit. I was wondering what some of the pros and cons of doing this are and any ideas that would help me along the way.