Steve68

iTrader: (23)

Went to the garage took a couple of pics of how it sit right now, just a couple to see,


The back



The Front



The hood next to 2 fridges, dont ask,



C6 parts all wrapped up!

That all right now, next week I think I'll finish the hinges and paint the mirrors, something at least,

Notice the compressor tucked between the fridges, and the surfboards in the back, I'll be using one of those tomorrow,

Steve68

iTrader: (23)

Next week, I'll be finishing up the hinges, painting the them and the mirrors, not much going on at the shop, paint booths open,

zoning and permiting next week,

tsnow678

iTrader: (3)

Man it is so good to hear you drug the Camaro out of storage and you are already working on it, Awesome. All of our threads are dead in the water! I will have a small something to add to mine next week but it has been like a ghost town since I got her running. I check my subscriptions about twenty times a day hoping someone is doing something to their cars and usually its nothing. Can't wait to see the progress and finally some pics!

Steve68

iTrader: (23)

Storage, thats my garage at the new house!!!

we just pushed it in,to have it in the garage,

I going to do small stuff to it, baybe a little door work next, pics of hinges and mirrors this week,

tsnow678

iTrader: (3)

Did you finish the mini-tubs? The more I see them the more I want them. I may end up going with AMD's so I don't have to cut the framerails. DSE had a 69 Camaro in their shop last weekend that was running a 345 tire with clearance! And the car was lowered over them!!!

Steve68

iTrader: (23)

Hell no!!!


and yesterday, the wife and I got out in the garage, we put the car on the dolly, rolled it out in to the driveway, I took off all the wrap, then cleaned up the garage, rolled it back in, put the cover back on,


was really wanting to get my shop done, already bought a lift from my friend, then finish the tubs and rear, install the subframe and motor tranny,

Steve68

iTrader: (23)

Couple of pics!!



Dolly rolls good, all the ureathane off the wheels though,




thats how she looks all cleaned up,

Going to put the hitch on my truck so I can get my lift home!

Steve68

iTrader: (23)

Working on the mirrors and hinges, started working on the rear spoiler too, needs work, might be sourcing another one,

sako

looks good. Keep the pics rolling.

bmf5150

Looking good!!hard to find time with all u have going on!

Steve68

iTrader: (23)

Thanks guys, got a line on another GM spoiler, mine has 6 coats of paint, 2 spots where the studs went through the glass, one area where the stud mounts is completely ripped off, needs some work,

still looking for a job, nice to see employers change the job classifications after you apply, and I dont' want to sell life insurance!!!!

Started a little work on the Nova yesterday, welded up some holes in the trans tunnel and made a patch for the old 4 speed hole, adding some POR 15 after that then Dynamat Xtreme, install the old carpet(don't want to put new carpet then ruin it with body work) bolt in the Scat Pro-car Rally 1000's.

I might start a thread, eventually do a 5.3 turbo in it,

Steve68

iTrader: (23)

went to the shop today, and damn if I didnt know it, one set of hinges is ready for paint, the other I have to do a mod here at the house, pics later,

cleaned up the mirrors, and one set of hinges, there ready for final sand and shoot, get the other hinges done, new spoiler, and I'll paint everything at once!!!

Steve68

iTrader: (23)

Hinge pics! well some parts

Steve68

iTrader: (23)

had to weld up a hole on the drivers upper hinge, this pic looked better on the camera!!!!




and now there all done and ready for a little more primer and some paint,

Steve68

iTrader: (23)

Got the new spoiler, well new to me, needs a little repair,

but this week I have tech school, not much being done, damn!!!!

Rocketrod

iTrader: (2)

It's looking good! Hang in there and keep plugging away at it when you can and eventually it will get down.

Steve68

iTrader: (23)

Thanks, If I get a shop built or done, it will get built quickly, I have everything lined up to assemble, just need to get the rear shortened up, weld some stuff, but I'm ready!!!

This week I'll work on the spoiler at the shop,

Steve68

iTrader: (23)

Varience paper work turned in, county date of December 6th, county guy said there changing the zoning and I'll get approved for my shop, as soon as it's ordered, it will be built and assembled in 30 days, and on the property in 3 days, PROGRESS!!!

Steve68

iTrader: (23)

Varience obtained, have to call the building people Monday, and the HOA, too,

just a little progress, one step at a time,

tsnow678

iTrader: (3)

Great news hope all goes well. Can't wait to see this project start rolling again.